Welcome Customer !

Membership

Jiangsu Xingxing Drying Equipment Co.,Ltd.
Free Member ·1YRS
ChangZhou,JiangSu
Manufacturer

Main Products: Dryer

Xwboo>Products

Jiangsu Xingxing Drying Equipment Co.,Ltd.Free·1YRS

  • E-mail

    zar.dangxian@jxxcn.com

  • Phone

    0086-519-88903988

  • Address

    Jiaoxi Industrial Park, Tianning District, Changzhou City

Contact Now

YCT series throughflow hot air circulation oven

Model
Nature of the Manufacturer
Manufacturer
Product Category
Drying Equipment Series
Place of Origin
City, Province
Overview
Product Introduction: The fresh air is sucked through fan and then filterd through primary,secondary and high efficiency. Therefore the purification reaches to one hundred thousand grades. Through steam...
Product Details

Principle of work

The air steam passes through the surface of raw material only in traditional level chamber drier,The disadvantage is that the coefficient of heat transfer is low and the utilization factor is poor and the drying time so long. Moreover because Of the defect of structure,it can not be in conformity with the requirements of“GMP",In order to overcome the shortcoming,we designed and developed the penetrating air stream box type drier on the basis of absorbing abroad advanced technology.The principle of work is shown in the figure listed below:

1.jpg 2.jpg

The fresh air is sucked through fan and then filterd through primary,secondary and high efficiency. Therefore the purification reaches to one hundred thousand grades. Through steam heat exchanger,the temperature of air is raised to certain temperature. The heated air is purified through filter again and then flows to every layer through left glow divider. It makes the hot air pass through the raw material to be dried evenly. The damp air is sucked from the inclined air channel under the drying tray. Pans of damp air are exhausted out off the oven through centrifuge fan and the other is circled and heated still. In this way the purpose can be realized.



Features

1.Because the hot air of each circle is filtered through sub-high or high efficiency filter, it can avoid effectively that the carried raw material in the air is deteriouated and polluted during the period of re-circle and re-heating. It is in conformity with the requirements of " GMP" fully.

2.Compared with laminar flow type oven,the dry capacity is higher. The thickness of raw material to be dried is more than three times,

3. The dry area is large and the efficiency is high,Compared with level flow type oven,the capacity is more than 3-6 times. The cost is lower.

4.It is suitable for all kinds of raw materials having the shape of granule of block drying.

5.It is easy in operation and quick in clean and exchange and low in trouble.

6.There are air filters at inlet and outlet. The raw material to be dried can not be polluted and the quality of raw materials to be dried can not be damaged.

7.The heat source may be steam or electric heater.


Technical parameters


ModelSize

Dry amount each time (kg)

Equipped power(KW)

Steam consume

Area of heat(m²)

Amount of air m³/h

Temperature difference between up and low℃

Size of drying tray

Quantity of drying tray

Weight(kg)

Overall dimensions

YCT-C-I

100

4

40-80

50

4000-7300

±2

550×610×80

10

2200

2350×1400×2280

YCT-C-II

200

7.5

80-120

80

7200-15800

±2

530×610×80

20

4000

3100×1600×2700


Remarks:all equipments are continually improved. Select equipment(s)shall be subject to the latest information.