All the settings of the Fangpusun Power Star can be remote controlled. When a software with new functions is available, it can be loaded into the system, so the Fangpusun Power Star always stays up to date. Several Fangpusun Power Star can be connected in parallel or to form a three-phase system. That means that up to nine Fangpusun Power Star can work together.
Multifunction contacts
These potential-free contacts can be programmed for many different applications. They can react to any event outside or inside of the inverter (grid availability, battery voltage, fault message ...) They can also be programmed on a timer or can be switched on during particular times (at night, at the weekend ...). In this way, they can serve to start up a generator, to switch off less important loads, to signal a fault, to charge batteries depending on the situation, etc.
Smart-boost function
With the smart-boost function, the output of another source of alternating current, such as a power generator or a charger connection, can be increased; even when special loads are being used (inductive, asymmetric, with high switch-on current). It is also possible to combine the Fangpusun Power Star with almost all inverters which are already present in order to increase the available output.
Model
PSH-D3000-12
PSH-D5000-24
PSH-D6000-48
PSH-D8000-48
Nominal battery voltage
12V
12V
24V
24V
Input voltage range
9.5-17VDC
19-34VDC
38-68VDC
38-68VDC
Continuous Power
2500VA
4500VA
5000VA
7000VA
Power 30 min.
3000VA
5000VA
6000VA
8000VA
Power 5 Sec.
7.5KVA
12KVA
15KVA
21KVA
Max.efficiency
93%
94%
96%
96%
Own consumption stand by
1.4W
1.8W
2.2W
2.4W
Own consumption stand by
14W
18W
22W
30W
Acoustic level without ventilation
40dB
Acoustic level with ventilation
45dB
Maximum load
Up to short-circuit
Maximum asymmetric load
Up to Pcont.
Load detection (stand-by)
2 to 25 W
Cos φ
0.1-1
Output voltage
Pure sine wave 230Vac (±2%) / 120Vac (1)
Output frequency
45Hz-60Hz(1) ± 0.05% (crystal controlled)
Harmonic distortion
<2%
Overload and short-circuit protection
Automatic disconnection with 3 time restart attempt
Overheat protection
Warning before shut-off - with automatic restart
Battery charger
Charge Characteristic
6 steps : Bulk-Absorption-Floating-Equalization-reduced floating-periodic absorption Number of steps,thresholds,end current and times completely adjustable with the RCC-02/03
Temperature compensation
With BTS-01 or BSP 500/1200
Maximum charging current
160A
140A
100A
120A
Input voltage range
150 to 265Vac / 50 to 140Vac (1)
Input frequency
45 to 65Hz
Input current max . (transfer relay) / Output current max .