150V MPPT Solar Charge Controller

NegotiableUpdate on September 21

Model

Nature of the Manufacturer: Manufacturer

Product Category: Solar Charge Controller

Place of Origin: City, Province

Online Consult Contact Information

Overview

150V MPPT Solar Charge Controller

Product Details

Untra-fast

Maximum Power Point Tracking(MPPT）

Especially in case of a clouded sky, when light intensity is changing continuously, an

ultra fast MPPT controller will improve energy harvest by up to

30%

compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers

Advanced Maximum Power Point Detection

in case of partial shading conditions

If partial shading occurs, two or more maximum power points may be present on

the power-voltage curve. Conventional MPPT's tend to lock toalocal MPP, which may

not be the optimum MPP. The innovative fangpusun algorithm will always maximize

energy harvest by locking to the optimum MPP

Outstanding conversion efficiency

No cooling fan maximum efficiency exceeds 98%

Flexible charge algorithm

Fully programmable charge algorithm(see the software page on our website), and eight

preprogrammed algorithms, selectable with a rotagy switch(see manual for details)

Extensive electronic protection

■Over-temperature protection and power derating when temperature is high.

■PV short circuit and PV reverse polarity protection.

■PV reverse current protection.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature

Display Operation

Graphical LCD display Simple menu-driven operation

Programming by buttons

Certificates

■Compliant with European Standards(CE)

■ROHS compliant

■SGS

■ISo9001

■Made in China

Maximum Power Point Tracking

Upper curve：

Output current o of a solar panel as function of output voltage（V）

The maximum power point(MPP)is the point

Pmax along the curve where the product x V reaches its peak

Lower curve:

Output power P=l as function of output voltage.

When using a PWM(not MPPT) controller the output voltage of the solar panel will be

nearly equal to the voltage of the battery, and will belower than Vmp.

Solar Charge Controller	MPPT 150/45D	MPPT 150/60D	MPPT 150/70D
Battery voltage	12/24/48 V Auto Select (Only Factory setting 36V)
Rated charge current	45A	60A	70A
Maximum PV power, 12V 1a, b)	650W	860W	1000W
Maximum PV power, 24V 1a, b)	1300W	1720W	2000W
Maximum PV power, 48V 1a, b)	2600W	3440W	4000W
Maximum PV open circuit voltage	150V absolute maximum coldest conditions, 145V start-up and operating maximum
Maximum efficiency	98%
Self-consumption	20 mA
Charge voltage ‘absorption’	Default setting: 14, 4/ 28, 8/43, 2/57, 6 V(adjustable)
Charge voltage ‘float’	Default setting: 13,8/ 27,6/41 ,4/55,2 V(adjustable)
Charge algorithm	multi-stage adaptive
Temperature compensation	-16mV/° C resp.-32mV/°C
Protection	Battery reverse polarity(fuse, not user accessible) PV reverse polarity /Output short circuit /Over temperature
Operating temperature	-30 to +60℃ (full r ated output up to 40℃)
Humidity	95%, non-condensing
Parallel operation	Yes(not synchronized)
ENCLOSURE
PV terminals 2)	35 mm²/ AWG2 (Tr models)
Battery terminals	35 mm²/AWG2
Protection category	IP43 (electronic components ),IP22 (connection area)
weight	3kg
Dimensions (h x w x Z)	Tr models:248×178×103mm
STANDARDS
safety	EC62109-1-2010

1a) If more PV power is connected,the controller will limit input power to the stated maximum.

1b) PV voltage must exceed Vbat +5V for the controller to start. Thereafter minimum PV voltage is Vbat +1V.