Our Lithium Counterbalance Forklift Battery 48V 300Ah is designed for Nichiyu FB25 forklift.
Product Details
The advent of the smart era is ushering in a wave of lithium batteries. We all know that the most critical core of any electric equipment is the power supply problem. The choice of batteries as the main source of power is crucial. Intelligent robots and disinfection robots , AGV intelligent pallet trucks and other smart devices need lithium batteries to provide power.
Product Description
Our Lithium Counterbalance Forklift Battery 48V 300Ah is designed for Nichiyu FB25 forklift.
The followings are the details:
Lithium Counterbalance battery 48V 300Ah for Nichiyu FB25
Rated voltage
48V
Capacity
300Ah
Voltage range
40V -58.4V
Charge current
Max 150A
Continuous discharge
400A
Peak discharge
800A
Dimension(L*W*H)
870*500*420mm
Weight
200kg
Charge temperature
0℃~50℃
Discharge temperature
-20~60℃
Cycle life(80% DOD)
> 2000 cycles
Communication protocol
CAN-bus
The picture and application of Lithium Counterbalance Forklift Battery 48V 300Ah for Nichiyu FB25
Electric forklift maintenance and repair Electric forklift driving safety, maintenance skills, in the production and storage of enterprises, the role of electric forklifts is increasingly prominent. The demand for electric forklift trucks from all walks of life is also gradually rising. When using an electric forklift, you should pay attention to:
1. Raise the wheels during the first test run, so that even if there is a connection error, there will be no danger.
2. When charging the battery, the charging circuit must be completely separated from the chopper, because in addition to affecting the charging of the charger, the overvoltage generated by the charger will also damage the chopper.
3. Special attention should be paid to the parallel layout of the battery to the electronic control and to be as short as possible.
4. When the vehicle is operating in a place with bad working conditions and difficult ventilation, it is recommended to implement forced ventilation to the controller.
5. No deceleration when turning, driving when the load is increased, overloading the forklift, driving on inclined and soft ground, etc. The driver should try to avoid these unsafe operations when operating.
6. Regularly clean the dust inside the DC motor, check the carbon brush and spring.
7. The battery should be regularly supplemented with distilled water (pure water).
8. If the electric forklift is not used for a long time, the battery should be fully charged and set aside. And keep charging at a frequency of about 1 to 2 months apart.