Welcome Customer !

Membership

Guangdong Komeg Industrial Co., Ltd.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Environmental Test Chambers

Xwboo>Products

3-ZONE THERMAL SHOCK TEST CHAMBER / KTS-500B

Model
Nature of the Manufacturer
Manufacturer
Product Category
3 Zone Thermal Shock Chambers
Place of Origin
City, Province
Overview
Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short time, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, auto parts, chemical materials, electronics and other materials. The test results can be used......
Product Details

Features:Water cooled. Ambient Temp. +25℃ no-load
1.High Temperature Shock Range+60℃ ~ +150℃
2. Low Temperature Shock Range-55℃ ~ -10℃
3.High Temperature Chamber Temp. Range+60 ~ +200℃
4. Low Temperature Chamber Temp. Range-70℃ ~ -10℃
5. Temperature fluctuation±0.5℃
6. Temperature uniformity±2.0℃
7. Recovery time-40℃~150℃ within 5mins (load 15KG)(the sensor put in the outlet of the unit)
8. Exposure timemore than 30 minutes
9. Transfer timeLess than 10 seconds
Structure
1.Internal dimensionW 650 × H 550 × D 1400 mm
2. EX. DimensionW 2290 × H 2260 × D 3150 mm (about)
3. Chamber Structureindependent product testing area, High temperature storage area, Low temperature cold storage area
4. Inner wall material:Stainless Steel Plate SUS304
5. Wall material:Top-grade Carbon Steel Plate
6. Insulation materialHigh temperature chamber:24k Glass woolLow temperature chamber:Rigid polyurethane Foam + glass fiber

FAQ:

Q1 : Can you customize the product?

A: Yes, we can customize any products according to requirements.

Q2 : How to choose the most suitable products?

A: Our professional team will give you the best suggestion, just be patiently to tell us the information about the parameters your required.

Q3 : Can you arrange installations and commissioning in our lab?

A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate;

Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it;

Thirdly, some of customized chambers we should to install and teach your team to operate.

20191016114144451.png

20191016114144187.png

20191016114147369.png

Similar Product Recommend