1.Application:
JBS-C Touchscreen Digital Display Semi-automatic Charpy Impact Testing Machine is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load.
It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research.
2.Description:
The equipment is simple operate with High Efficiency, Raise Pendulum, Hanging Swing, Feeding, Positioning,Shock and Temperature Adjustment Settings are controlled by a microcontroller, equipped with special feeding device automatic feeding, automatic sample face orientation. Sample baked to impact time is less than two seconds, meet the requirements of low-temperature metal Charpy impact test method.
It can use the remaining energy to automatic Raise Pendulum after impact the sample, prepare for the next test preparation, high efficiency.
3.Technical Specifications:
Model | JBS-300C | JBS-450C | JBS-600C | JBS-750C |
Control Method | Single Chip Control |
Max. Impact Energy | 300 J | 450 J | 600 J | 750 J |
Impact Speed | 5.24 m/s |
Pre-rising Angle Of The Pendulum | 150° |
Angle Accuracy | ±0.1° |
Specimen Bearer Span | 40 mm |
Round Angle Of The Jaw | R 1.0~1.5 mm |
Round Angle Of Impact Edge | R 2.0~2.5 mm (Special Order: R8±0.05 mm) |
Thickness Of Impact Knife | 16 mm |