The marine transformer produced by our company is dry self-cooled (air-cooled) transformer which can be used as the isolation device for power motive and lighting circuits in the power network
Product Details
Introduction of Marine Transformer
The marine transformer produced by our company is dry self-cooled(air-cooled) transformer which can be used as the isolation device for power motive and lighting circuits in the power network;
The marine transformer produced by our company has the insulationclass of B, F, H and the frequency of 50 Hz or 60 Hz. For the marine transformer, the capacity is 500 kVA and downward while the voltage class is of 1 kv; for the ocean platform transformer the capacity is 2500 kVA and downwardwhile the voltage class is 10 kv and downward.
The company has solid technical force and can design and producevarious kinds of special sizes of transformer on customer’s request.
The Structural Features of the Product
The core material is made of quality cold-rolled silicon steelsheet, carefully laminated in full 45° diagonally;
The insulation materials are made of Class B, F or H NOMEX paperand the service life of the transformer is longer than 30 years;
The coil of the marine transformer has the non-closure structurewhile that of the ocean platform transformer is cast with by stuffing epoxy resin therefore it has good flame retardation;
The case of the transformer is made of quality steel sheet withProtection Class of IP00, IP20, IP22 and IP23;
The stuffing box is set at the left or the right on the top ofthe case of the transformer and the wiring style for the capacity of 500 kVA and upward is bottom in/bottom out. The cable holes are opened on the base of the transformer with wire scratch-proof and fixation device.
Application Conditions
The product of our company can be normally operated under followingcircumstances:
Ambient temperature: -25°C – 45°C;
Relative humidity: ≤95%
Under vibration and shock generated form the place where thetransformer is installed;
Swing angle ≤22.5°, inclining angle ≤15°;
Under affection from dew, oil mist, salt mist and molds.