Welcome Customer !

Membership

SHANGDONG NEUTRON CNC TECHNOLOGY CO., LTD.
Free Member ·1YRS
JiNan,ShanDong
Manufacturer

Main Products: Forming Machine|Vertical Drilling Machine

Xwboo>Products

SHANGDONG NEUTRON CNC TECHNOLOGY CO., LTD.Free·1YRS

  • E-mail

    sale@neutrontech.cn,info@neutrontech.cn

  • Phone

    8653188252860

  • Address

    Room 911,Building No.9,Shandong Steel New World Plaza,No.61-11 Gongyenan Road,High-Tech Development Zone,Jinan,China

Contact Now

NG312 Guardrail Forming Machine Model

Model
Nature of the Manufacturer
Manufacturer
Product Category
Forming Machine
Place of Origin
City, Province
Overview
NG312 Guardrail Forming Machine Model
Product Details




1. Raw Material:

Steel grade:       Q235

Thickness:   2.5~4.0mm

Coil inner diameter:φ508~φ600

Coil out diameter: ≤φ1900

Coil weight: ≤10T

Automatic decoiler – Feeding - Leveling - Punching and cutting - Roll forming - Product packing manually


2. The Structure of Machine

l Automatic expansion decoiler

1) Double unrolling machine,  

2) Adopt automatic expansion system, power 2.2kw  

3) Maximum coil weight: 10,000kg,

4) inner diameter: 450-600mm, out diameter max 1900mm  

5) with brake system.


l Feeding & leveling

wall plate type 9 rollers leveler, 2 roller feeding, 7 roller leveling. Leveling roller 120mm, material 40Cr, heat treatment HRC48º~52º. Four stand roller to control sheet up and down movement. Power: 11kw, inverter adjusting, speed: 10-25m/min, feeding width max 500mm. 


l Punching and cutting:

1) Use four column type press from Yangli group, equip with punching and cutting die set, fit for 9 or 10 holes. With one set of middle hole punching, cylinder dia 160mm, traveling distance: 60mm

2) Cut to length by encoder: length accuracy 4320±2.0mm, length can set in PLC.

3) Fast feeding unit: after cutting, sheet feeding into roll forming unit, 2.2kw, roller Dia: 120mm, material 40Cr, HRC48º~52º.


l Roll forming machine

1) Main motor power: 45kw

2) Drive: gearbox driving, 10units, GY230  

3) Main shaft diameter: 80mm and 40Cr steel

4) Roller material: GCR15 quenched 58°-62°, chromed

5) Roll station:12 stations

6) Speed: 2-3pieces per minute (4320mm length)


l Output table


l Control panel


a. Control system

Ø Voltage, frequency, phase: 380v, 50hz, 3phase

Ø Automatic length measurement: One-unit tooling of length measuring which is lightly pressed on the surface of the steel sheet; the tolling will roll with the moving speed of the steel sheet and then sense to measure its length.

Ø Automatic quantity measurement

Ø Computer used to control length & quantity, machine will automatically cut to length and stop when required quantity is achieved

Ø Length inaccuracy can be amended easily


b. Control panel: button-type switch, touch screen


c. Unit of length: millimeter


d. Protection function

Ø Motor over: Load protection

Ø System over: Current protection

Ø Short circuit protection


e. Additional function

Ø Display total length produced

Ø Display total quantity produced

Ø Display forming speed