PLD3016 CNC Drilling Machine for Plates
Main specification of PLD3016

Technical specification of PLD3016
Name | Detail |
|
Size of work piece | Thickness | Max.80mm |
Width ×length | 1600mm×3000mm one piece |
1500mm×1600mm two pieces |
800mm×1500mm four pieces |
Axis | Quick change chuck | Morse Taper 3# 4# |
Diameter of Drilling head | Φ12mm-Φ50mm |
Variable speed mode | Stepless speed adjustment |
rotation speed | 120-560r/min |
max. feeding stoke | 240mm |
Feeding | Hydraulic Stepless speed adjustment |
Clamping | Clamping thickness | 15-80mm |
Number of clamps | 12 pieces |
Clamping force | 7.5KN |
Clamping start | Foot switch |
Cooling water | Type | Forced circulation |
Hydraulic | clamping | 6MPa(60kgf/cm2) |
Volume | 100L |
Air force | Air supply | 0.6MPa(4kgf/cm2) |
Servo Motor | Axis | 5.5KW |
Hydraulic pump | 2.2KW |
Servo motor of chip removal device | 0.4KW |
Cooling pump | 0.25KW |
Servo motor of X axis | 1.5KW |
Servo motor of Y axis | 1.0KW |
Servo motor of Z axis | 1.0kW |
Size | L×W×H | About 5560×4272×2449mm |
Weight | Machine | 7600kg |
Chip removal system | 400kg |
Stroke | X Axis | 3000mm |
Y Axis | 1600mm |
Postioning speed | Max. 8000mm/min |
12) Working temperature: 0℃ ~ 40℃
Power: Three phase four wire system
AC Voltage: 380V
Fluctuation of voltage: ±10%
Frequency: 50 Hz


