PLD2016 CNC Drilling Machine For Plates Plate Drilling Machine Steel Structure Steel Bridge

Technical Specification of PLD2016
Item | Details | Value |
Size of work piece | Thickness | Max.100mm |
Width ×length | 2000mm×1600mm one piece |
1600mm×1000mm two pieces |
1000mm×800mm four pieces |
Drilling Spindle | Quick change chuck | Morse Taper 3#,4# |
Diameter of Drilling head | Φ12mm-Φ50mm |
Variable speed mode | Stepless speed adjustment |
Rotation speed | 120-560r/min |
Max. feeding stoke | 180mm |
Feeding | Hydraulic Stepless speed adjustment |
Clamping | Clamping thickness | 15-80mm |
Number of clamps | 12 pieces |
Clamping force | 7.5KN |
Clamping start | Foot switch |
Cooling water | Type | Forced circulation |
Hydraulic | Clamping | 6MPa(60kgf/cm2) |
Volume | 100L |
Air force | Air supply | 0.4MPa(4kgf/cm2) |
Servo Motor | Axis | 5.5KW |
Hydraulic pump | 2.2KW |
Cooling pump | 0.25KW |
Motor of chip removal device | 0.75KW |
Servo motor of X axis | 2KW |
Servo motor of Y axis | 1KW |
Size | L×W×H | About 5183×2605×2474mm |
Weight | Machine | 5600kg |
Chip removal system | 800kg |
Stroke | X axis | 2000mm |
Y axis | 1600mm |
Max speed | 10000mm/min |
Working temperature: 0℃ ~ 40℃ Working humidity: ≤75%
Power: Three phase four wire system
AC Voltage: 380V /415 V Fluctuation of voltage: ±10% Frequency: 50 Hz±1HZ

