Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-LDG Sanitary electromagnetic flowmeter for food processing

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.
Product Details
  • Specification

 Product Sanitary type electromagnetic flowmeter
 Model SUP-LDGS
 Diameter nominal DN15~DN100
 Nominal pressure 0.6~4.0MPa
 Accuracy ±0.5%,±2mm/s(flowrate<1m/s)
 Repetitiveness 0.2%
 Liner material PFA, F46, Neoprene, PTFE, FEP
 Electrode material Stainless steel SUS316L, Hastelloy C, Titanium,
  Tantalum, Platinum-iridium
 Medium temperature Integral type: -10℃~80℃
  Split type: -25℃~180℃
 Ambient temperature -10℃~55℃
 Power supply 100-240VAC,50/60Hz / 22VDC—26VDC
 Electrical conductivity Water 20μS/cm other medium 5μS/cm
 Ingress protection IP65, IP68(optional)
 Product standard JB/T 9248-2015

 

  • Measuring principle

Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe. 

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

 

            Where:
              E-Induced electromotive force 
              K-Meter constant 
              B-Magnetic induction density
              V-Average flow speed in cross-section of measuring tube 
              D-Inner diameter of measuring tube                                                                            

magnetic flowmeter principle   

  • Introduction

  SUP-LDGS sanitary electromagnetic flowmeter is applicable for all food grade conductive liquids measure, such as drinking water, food processing, pharmaceutical industry and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer.

Sanitary electromagnetic flowmeter

Noted: the product strictly prohibited to be used in explosion-proof occasions.


  • Application

      Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

magnetic flowmeter application

  • Automatic calibration line

magnetic flowmeter calibration

mt flowmeter calibrate

yokogawa flowmeter magnetic

  • Stability test

emc test magnetic flowmeter

success story

mag flowmeter application

mag flowmeter application