Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-LDG Stainless steel body electromagnetic flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Magnetic flowmeters operate under the principle of Faradays Law of Electromagnetic Induction to measure liquid velocity. Following Faradays Law, magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. In order of usage, magnetic flowmeter use in water/wastewater industry, chemical, food and beverage, power, pulp and paper, metals and mining, and pharmaceutical application.
Product Details
  • Specification

 Product Electromagnetic flowmeter
 Model SUP-LDG
 Diameter nominal DN15~DN1000
 Nominal pressure 0.6~4.0MPa
 Accuracy ±0.5%,±2mm/s(flowrate<1m/s)
 Liner material PFA,F46,Neoprene,PTFE,FEP
 Electrode material Stainless steel SUS316L, Hastelloy C, Titanium,
  Tantalum Platinum-iridium
 Medium temperature Integral type: -10℃~80℃
  Split type: -25℃~180℃
 Ambient Temperature -10℃~60℃
 Electrical conductivity Water 20μS/cm other medium 5μS/cm
 Structure type Tegral type, split type
 Ingress protection IP65
 Product standard JB/T 9248-1999 Electormagnetic Flowmeter

 

  • Measuring principle

Mag meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An Electromagnetic Flowmeter is a volumetric Flowmeter that measures the flow velocity of a liquid through a pipe. 

The measurement principle of magnetic flowmeters can be described as follows: when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

 

            Where:
              E-Induced electromotive force 
              K-Meter constant 
              B-Magnetic induction density
              V-Average flow speed in cross-section of measuring tube 
              D-Inner diameter of measuring tube                                                                            

Stainless steel body electromagnetic flowmeter   

  • Introduction

 SUP-LDG electromagnetic flowmeter is applicable for all conductive liquids. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. Can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions.

Stainless steel magnetic flowmeter

Noted: the product strictly prohibited to be used in explosion-proof occasions.


  • Application

      Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

SS magnetic flowmeter


  • Description

Stainless steel flowmeterSS body flowmeter

  • Automatic calibration line

magnetic flowmeter calibrationmt flowmeter calibrateyokogawa flowmeter magnetic

  • Stability test

emc test magnetic flowmeter

success storymag flowmeter applicationmag flowmeter application