Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-RD909 70 meters Radar level meter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
SUP-RD909 Radar level meter adopts a recommended industry emission frequency of 26GHz, so it has beam angle is small, concentrated energy, has stronger anti-interference ability and greatly improves the precision and reliability of measurement. The measurement range of up to 70 meters, covering a large reservoir water level measurement.
Product Details
  • Specification
 Product Radar level meter
 ModelSUP-RD909
 Measure range0-70 meters
 ApplicationRivers, Lakes, Shoal
 Process ConnectionThread G1½ A"/frame /flange
 Medium Temperature-40℃~100℃
 Process Pressure   Normal pressure
 Accuracy±20mm 
 Protection GradeIP67 / IP65
 Frequency Range26GHz
 Signal Output4-20mA (Two-wire/Four)
RS485/Modbus
 Power supplyDC(6~24V)/ Four-wire
DC 24V / Two-wire
  • Introduction

SUP-RD909 Radar level meter adopts a recommended industry emission frequency of 26GHz. The measurement range of up to 70 meters, covering a large reservoir water level measurement.

water radar level meter

river level controller

 

  • Product Size

 

water radar level meter

  • Installation guide
level meterLevel meterLevel meter installation

Be installed in the diameter of the 1/4 or 1/6.   

Note: The minimum distance from the tank 

wall should be 200mm.

Note:  ① datum 

②The container center or axis of symmetry

The top conical tank level, can be installed at 

the top of the tank is intermediate, can guarantee 

the measurement to the conical bottom

 A feed antenna to the vertical alignment surface.  

 If the surface is rough, stack angle must be used 

 to adjust the angle of cardan flange of the antenna 

 to the alignment surface. 

  (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)