Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-LDG Insertion type electromagnetic flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Supmea Insertion type electromagnetic flowmeter is based on Faradays law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field.
Product Details
  • Specification
SizeDN100mm-DN3000mm
Nominal Pressure1.6Mpa
Accuracy1.5%
ProbeABS, Polyurethane
ElectrodeSUS316L, Hastelloy B, Hastelloy C
Structure Type Integral type, remote type
Medium Temperature-20~+80degC
Ambient Temperature-20~+60degC
Ambient Humidity 5~99%RH(Relative humidity) 
Measuring RangeMax 15m/s
Conductivity>5us/cm
Protection ClassIP65(Standard); IP68(Optional for remote type)
Process Connection2'' Thread(Standard), 2'' Flange(Optional)
Output Signal4-20mA/Pulse
CommunicationRS485(Standard), HART(Optional), GPRS/GSM(Optional)
Power SupplyAC220V(Can be used for AC85-250V)
DC24V(Can be used for DC20-36V)
DC12V(Optional), Battery powered 3.6V(Optional)
Power Consumption<20W
AlarmUpper Limit Alarm / Lower Limit Alarm
Self-diagnosisEmpty Pipe Alarm, Exciting Alarm

 

 

  • Measuring principle

The working principle of the Insertion type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows through, an induced voltage will be generated. Two electrodes inside the pipe measure the induced voltage generated. The measuring pipeline is electromagnetically isolated from the fluid and the measuring electrode through a non-conductive lining (rubber, Teflon, etc.)