Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-LDG Battery powered electromagnetic flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
The battery-powered electromagnetic flow meter converter adopts internal battery power supply without external power supply. It is suitable for working conditions where the field power grid cannot be reached and the power grid is difficult to lay. It is especially suitable for the monitoring, metering and settlement of the tap water supply system.
Product Details
  • Specification

 Product

 Electromagnetic flowmeter

 Model

 SUP-LDG

 Diameter nominal

 DN3~DN2100

 Accuracy

0.5%

 Environmental temperature 

-20℃-50℃

 

Relative humidity

≦95%

 Lining material

PTFE, PFA, F46, neoprene, polyurethane rubber, high temperature
rubber

 Flow range

0-15m/s

 Conductivity

Clean water >20 μs/cm

 Communication

RS485 (modbus protocol), GPRS

 Electrode material

SS316, Hastelloy B/C, titanium, tantalum, platinum-iridium alloy,

tungsten carbide

 Electrode type

Standard , scraper, replaceable

 Connection

Flange, plug-in, clamp ,clip-on

 Medium temperature

-20℃~+60℃
Nominal pressure
0.6~4.0Mpa (other can be customized)
Measurement parameter
Instantaneous flow, instantaneous flow rate
Record parameter
Accumulated total Flow
Detection and alarm parameters
Fluid empty pipe detection alarm, excitation current detection alarm
Test mode output signal
Unit volume flow pulse

 

  • Measuring principle

Mag meter works based on Faraday's law, when the liquid goes through the pipe at the flow rate of v with a diameter D, within which a magnetic flux density of B is created by an exciting coil, the following electromotive E is generated in proportion to flow speed v:

E=K×B×V×D

Where:
E-Induced electromotive force 
K-Meter constant 
B-Magnetic induction density
V-Average flow speed in cross-section of measuring tube 
D-Inner diameter of measuring tube   

flowmeter principle

The sensor uses the induced potential E as a flow signal and transmits it to the converter. After a series of digital processing by amplifying, transforming and filtering, the instantaneous flow and cumulative flow are displayed by a dot matrix liquid crystal with backlight.


                 

  • Introduction 

The battery-powered electromagnetic flow meter converter adopts internal battery power supply without  external power supply. It is suitable for working conditions where the field power grid cannot be reached and  the power grid is difficult to lay. It is especially suitable for the monitoring, metering and settlement of the tap  water supply system. The battery-powered electromagnetic flow meter converter adopts ultra-low power circuit technology to design efficient and reliable excitation and signal processing circuits to achieve measurement functions to ensure that the converter has high reliability and stability. At the same time, it  adopts highly efficient system management technology. The system power consumption is reduced, power supply cost is saved, and accurate measurement is realized at the same time.