Welcome Customer !

Membership

Supmea Automation Co.,Ltd
Free Member ·1YRS
,
Manufacturer

Main Products: Flowmeter|Liquid Level Instrument|Pressure Transmitter|Temperature Sensor

Xwboo>Products
Product Categories

Supmea Automation Co.,LtdFree·1YRS

  • E-mail

    info@supmea.com

  • Phone

  • Address

Contact Now

SUP-TRC 400 Residual chlorine meter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
SUP-TRC 400 Residual chlorine meter has a built-in sensor, which has the characteristics of high measurement accuracy, fast response time and low maintenance cost.
Product Details
  • Specification

SUP-TRC 400 Residual chlorine meter

  Product 

 Residual chlorine meter

  Model

 SUP-TRC 400

  Measure range

 Residual chlorine: (0~5) mg/L

 Temperature: (0.1~40.0)℃

  Display

 7 inch touch screen

  Protective box size

 Dimensions: 400mm×300mm×200mm

 Window size: 155mm×87mm

  Transmit output

 (4~20)mA (optional)

  Load resistance

 ≤750Ω

  Communication

 RS485, Modbus

  Environmental humidity

 ≤95% no condensate

  Power supply

 220VAC

  Ingress protection

 IP43

 

SUP-ERC 400 Residual chlorine sensor

  Measurement content

 HCLO、CLO2

  Measuring system

 Microelectronics MEMS technology, special membrane structure

  Measure range

 (0~5)mg/L

  Accuracy

 When ≤0.1mg/L, the absolute error is ±0.01mg/L;

When ≥0.1mg/L, ±5% of the measured value or ±0.02mg/L (whichever is greater)

  Resolution

 0.01

  Polarization time

 When using for the first time, first pass water for 2 hours in chlorinated water, and then power on for half an hour.

  Response time

 Less than 30s after polarization is completed

  Minimum conductivity

 ≥100us/cm, can not be used for ultrapure water

  Operating temperature

 (0~40)℃ (non-condensing)

  Temperature compensation

 Pt1000 with built-in integrated automatic compensation

  Max pressure

 4bar

  Recommended flow rate

 ≥0.03m/s in flow cell

  pH range

 (5~9) pH, below 5 will damage the membrane head

  Maximum chlorine concentration

 ≥5ppm

  Power supply

 Standard 24V DC±2V; optional 12V DC±2V

  Power consumption

 1.56W

  Digital communication

 MODBUS RS485

  Cable length

 Standard 3 meters, others can be customized

  Probe weight

 210g

  Thread size

 NPT 3/4

  Connection method

 5-pin waterproof aviation plug

  Moisture-proof material

 PVC and Viton® O-ring seals
  • Introduction

​​​​​​The residual chlorine meter has a built-in sensor, which has the characteristics of high measurement accuracy, fast response time and low maintenance cost. The residual chlorine meter outputs 4~20mA standard signal and RS485 signal, which can be connected to various regulators, and can be connected to two-position regulators, time proportional regulators, non-linear regulators and classic PID regulators according to requirements, which can be combined into various types. Residual chlorine control system.

  • Features
  1. The electrode measurement is accurate and the response speed is fast
  2. LCD with backlight, easy and intuitive operation
  3. With automatic temperature compensation, pH manual compensation function
  4. Restore factory function to avoid data loss by misoperation
  5. Isolated 4-20mA standard signal can realize signal remote transmission
  6. Range can be switched manually
  7. A variety of calibration methods are convenient for on-site adjustment