The Wall Mounted Ultrasonic Flow Meter is the basic type of ultrasonic flow meter. It is combined by two parts, the transmitter and the sensor. The wall mounted ultrasonic flow meter have flexible configuration on the transmitter and sensor selection. For the transmitter, user can choose it by the working ambient. For the sensor, user can choose to use the clamp on type, insertion type, inline type according to the condition in the working field.the wall mounted ultrasonic flow meter able to apply different require......
Product Details
Wall Mounted Ultrasonic Flow Meter
The Wall Mounted Ultrasonic Flow Meter is the basic type of ultrasonic flow meter. It is combined by two parts, the transmitter and the sensor. The wall mounted ultrasonic flow meter have flexible configuration on the transmitter and sensor selection. For the transmitter, user can choose it by the working ambient. For the sensor, user can choose to use the clamp on type, insertion type, inline type according to the condition in the working field.the wall mounted ultrasonic flow meter able to apply different requirement on the signal output, it has multi-types of signal output like Pulse, 4-20mA,RS485 etc.
Host
Principle
Transit- time ultrasonic flowmeter
Accuracy
±1%
Display
2X20 character LCD with backlight, support the language of Chinese, English and Italy
Signal Output
1 way 4~20mA output, electric resistance 0~ 1K, accuracy 0. 1%(optional)
1 way OCT pulse output(Pulse width 6~1000ms, default is 200ms)
1 way Relay output
Signal Input
3 way 4~20mA input, accuracy 0. 1%, acquisition signal such as temperature, press and liquid level
Connect the temperature transducer Pt100, can finish the heat/energy measurement
Data Interface
Insulate Rs485 serial interface, upgrade the flowmeter software by computer, support the MODBUS
Special Cable
Twisted-pair cable, generally, the length under 50 meters ; Select the RS485, transmission distance can over 1000m
Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump
Measuring Medium
Medium
water,sea water ,alcohol,Acid and alkali,waste water,beer,all kinds of oil Single liquid can transmit sound wave.
Temperature
-30~160℃
Turbidity
No more than 10000ppm and less bubble
Flowrate
0~±7m/s,Forward and backward measurement
Work environment
Protection grade
Host:IP67;flow sensor:IP68
temperature
Host:-20~60℃;flow sensor:-30~ 160℃
Humidity
Host: 85%RH; Flow sensor:can measure under water, water depth^2m (tansducer sealed glue)
Power Supply
DC8~36V or AC85~264V
Power Consumption
1.5W
Dimension
132*150*85mm(host)
The wall-mounted ultrasonic flow meter is divided into two parts: one part is a header (wall-mounted and hand-held) and the other part is a sensor.
Installation of wall mounted ultrasonic flowmeter.
Measure the old working condition of the pipeline, do not install the sensor using the 2 sound layer (V method) as much as possible, and the sound layer (Z method) shall be selected, so that the ultrasonic wave emitted by the flow sensor of the ultrasonic flow meter can be easily received by the measured flow sensor, And the signal strength of the host of the ultrasonic flowmeter is ensured, and the high-precision measurement value can be ensured.
2. When the new pipeline is measured, the surface of the pipeline can be first treated with the roving when a paint or a zinc-crossing pipeline is encountered, and then the spun yarn can be used for continuous treatment, so that the installation point of the flow sensor of the ultrasonic flow meter is smooth and flat, The flow probe of the ultrasonic flow meter can be in good contact with the outer wall of the measured pipe.
3. When the pipe is in the vertical upward direction, if the fluid in the pipe is upward, it can be measured, if the liquid is a top-down flow, the pipe is not suitable for the collection of the flow data.
In addition, before collecting the flow data of a pipeline, we must measure the outer circumference of the pipeline (with tape measure), the thickness of the wall (with the thickness gauge), the temperature of the outer wall of the pipeline (the surface temperature measuring instrument) and so on.
Remove the insulation layer and protective layer in the installation section, and polish the transducer according to the wall surface of the installation. Avoid local depressions, protrusions trimmed, lacquer rust layer ground.