Olive oil turbine flow meter is made of stainless steel by die casting, with exquisite appearance and durability. Turbine type conduction, precise measurement, clamp type, screw type, flange type optional connection, food hygiene level manufacturing standard. Olive oil turbine flow meter is made of 316L stainless steel, and the turbine bearing is degreased to ensure the sanitation of the liquid receiving part. Olive oil turbine flow meter has become the most widely used instrument in the food industry.
Product Details
Sanitary type olive oil turbine flow meter
Olive oil turbine flow meter is made of stainless steel by die casting, with exquisite appearance and durability. Turbine type conduction, precise measurement, clamp type, screw type, flange type optional connection, food hygiene level manufacturing standard. Olive oil turbine flow meter is made of 316L stainless steel, and the turbine bearing is degreased to ensure the sanitation of the liquid receiving part. Olive oil turbine flow meter has become the most widely used instrument in the food industry.
Medium
Water,Oil,Diesel,Alcohol,Enthanol,Milk,Beer
Accuracy
0.50%
Flange standard
GB/T 9119-2010, DIN, ANSI, JIS
Output
Pulse, 4-20mA analog output, RS485 (Modbus-RTU protocol), HART
Diameter and installation
Flange connection DN15-DN200
Screw connection: DN4-DN50
Tri-Clamp connection:DN10-DN80
Wafer flange connection: DN4-DN200
Rated Pressure
1.6MPa, 2.5MPa,6.4MPa MAX 42MPa
Medium temperature
Default type T1: -20℃~+80℃ (Standard)
High temp. type T2: -20℃~+120℃ (OEM)
High temp. type T3: -20℃~+150℃(OEM)
Operation condition
Operating temperature: -20℃~+60℃
Related humidity: 5%~90%
Atmospheric pressure: 86kPa~106kPa
Ingress protection
IP65
Explosion proof
ExdIIBT6 (explosion proof type)
The correct installation method of olive oil turbine flow meter sanitary stainless steel clamp pipe fittings:
(1) the splashing impurities during the welding of the end pipe and snap ring affect the sealing of the end pipe. Before installation, the welding slag on the sealing surface shall be removed to ensure the sealing effect.
(2) when the location of the snap ring is determined, the gap between the two pipe ends shall be determined by calculation according to the elongation of the pipe and the ambient temperature during construction. The deviation of dimensions shall be ensured during construction.
(3) control the distance L between the snap ring and the end pipe. The control of l should be combined with the instructions. When the gap between the two pipe ends is the smallest, make sure that the snap ring is right against the inclined plane.
(4) on the premise of a certain moving distance, the greater the weld height and width of the welding between the snap ring and the end pipe and the perpendicularity error between the plane of the snap ring and the axis of the end pipe, the smaller the expansion of the joint and the worse the use effect.