Kerosene turbine flowmeter is a kind of precision flow measurement instrument. It can be used to measure the flow and total amount of liquid with the corresponding flow totalizer. It has the advantages of simple structure, light weight, high precision, good reproducibility and sensitive response. If the kerosene turbine flowmeter is matched with the display instrument with special functions, it can also be used for quantitative control, over alarm, etc. it is an ideal instrument for flow measurement and energy savi......
Product Details
high precision kerosene liquid turbine flow meter
Kerosene turbine flowmeter is a kind of precision flow measurement instrument. It can be used to measure the flow and total amount of liquid with the corresponding flow totalizer. It has the advantages of simple structure, light weight, high precision, good reproducibility and sensitive response. If the kerosene turbine flowmeter is matched with the display instrument with special functions, it can also be used for quantitative control, over alarm, etc. it is an ideal instrument for flow measurement and energy saving The kerosene turbine flowmeter has the function of on-site display, and can also transmit and output the flow signal in the form of pulse. The kerosene turbine flowmeter has the advantages of low price, high integration and small size, and is especially suitable for use with the secondary display, PLC, DCS and other computer control systems.
Medium
Water,Oil,Diesel,Alcohol,Enthanol,Milk,Beer
Accuracy
0.50%
Flange standard
GB/T 9119-2010, DIN, ANSI, JIS
Output
Pulse, 4-20mA analog output, RS485 (Modbus-RTU protocol), HART
Diameter and installation
Flange connection DN15-DN200
Screw connection: DN4-DN50
Tri-Clamp connection:DN10-DN80
Wafer flange connection: DN4-DN200
Rated Pressure
1.6MPa, 2.5MPa,6.4MPa MAX 42MPa
Medium temperature
Default type T1: -20℃~+80℃ (Standard)
High temp. type T2: -20℃~+120℃ (OEM)
High temp. type T3: -20℃~+150℃(OEM)
Operation condition
Operating temperature: -20℃~+60℃
Related humidity: 5%~90%
Atmospheric pressure: 86kPa~106kPa
Ingress protection
IP65
Explosion proof
ExdIIBT6 (explosion proof type)
Precautions for use and maintenance of high precision kerosene liquid turbine flow meter:
◆ when using, keep the tested liquid clean and free of impurities such as fibers and particles.
◆ when using the sensor, fill the sensor slowly with liquid first, and then open the outlet valve (the valve shall be installed at the back of the flowmeter). It is strictly forbidden to be impacted by high-speed fluid when the sensor is in the state of no liquid.
◆ the maintenance cycle of the sensor is generally half a year. During maintenance and cleaning, please pay attention not to damage the parts in the measuring chamber, especially the impeller. Please pay attention to the position relationship between guide parts and impeller during assembly.
◆ when the sensor is not in use, the internal liquid shall be cleaned. After drying, a protective sleeve shall be added at both ends of the sensor to prevent dust from entering, and then it shall be stored in a dry place. (this is very important)
The simultaneous interpreting of the filters should be cleaned regularly, and the liquid should be cleaned when not in use. Like the sensors, the dustproof cover should be placed in the dry place.