Propane in industry is liquid hydrocarbon produced by FCC unit, which is separated and produced by gas separation unit after hydrogen sulfide and mercaptan removal. In production, propane is mainly used as protective gas for metal parts quenching and carburizing, mixed with butane as atomizing agent, deasphalting solvent and high calorific value fuel.Propane gas turbine flow meter is the main type of velocity flowmeter. When the measured fluid flows through the turbine flowmeter sensor, under the action of the flui......
Product Details
Safe Gas Turbine Flow Meter For Propane Gas
Propane gas turbine flow meter is the main type of velocity flowmeter. When the measured fluid flows through the turbine flowmeter sensor, under the action of the fluid, the impeller is forced to rotate, and its speed is proportional to the average flow velocity of the pipeline. Meanwhile, the blade periodically cuts the magnetic force line generated by the electromagnet,Change the magnetic flux of the coil. According to the principle of electromagnetic induction, the pulsating electric potential signal, i.e. electric pulse signal, will be induced in the coil. The frequency of the electric pulse signal is proportional to the flow of the measured fluid.
Main Application
Natural Gas,LPG,Compressed Air,Nitrogen.Propane
Nominal Diameter
DN25-DN300
Span
2.5-6500m³/h
Rated Pressure
1.6MPa~4.0MPa
Accuracy Level
±1.5%R 1.0% Selectable
Repeatablility
±0.1%
Range Ration
1:10,
Material
Body/Rotor Support:SS304(SS316L optional)
Impeller:Double Phase Steel
Shaft:Stainless Steel
Bearing:Stainless Steel Ball Bearing
Process Connection
Flange/Thread NPT/Wafer
Working Condition
Medium Temperature:-20℃~+80℃
(Max Customize to150℃)
Ambient Temperature:-20℃~+60℃
Rated Humidity:5%~90%
Ambient Pressure:86KPa~106KPa
Power
24VDC
3V 10AH lithium battery.
Consumption
24VDC power:<1W
Battery:≤1W,lifetime>3yrs
Signal Output
Pulse,4-20mA,Switch Signal.
DIgital Communication
RS485,MODBUS,HART,PROFIBUS-DP
Signal wire joint
Hausman joint/Inner screw M20*1.5 or customized
Explosion Proof Grade
ExdIIBT6/ExiaIICT4
Degree of Protection
IP65 or Higher
Explosion proof form of propane gas turbine flowmeter
Propane gas is flammable and explosive gas, so the flowmeter for measuring this gas also needs to have good explosion-proof treatment and be in the appropriate explosion-proof grade
Here is the general knowledge about explosion-proof grade
1. Intrinsically safe "I" (intrinsically safe electrical equipment and its associated equipment) intrinsically safe circuit: under specified test conditions, the electric spark and thermal effect generated under normal operation or specified fault state cannot ignite the specified explosive gas or steam circuit.
Intrinsically safe electrical equipment: all circuits are intrinsically safe electrical equipment.
The intrinsically safe part of intrinsically safe equipment and associated equipment is divided into IA and Ib:
¨ Ia: electrical equipment that cannot be ignited due to normal operation + one fault + two faults of any combination.
¨ Ib: normal operation + intrinsically safe electrical equipment that cannot cause ignition under a fault condition.
It can be seen that ia level is higher than IB level
Associated equipment: electrical equipment equipped with intrinsically safe circuit and non intrinsically safe circuit, and whose structure is non intrinsically safe circuit and can not have adverse effect on intrinsically safe circuit.