Welcome Customer !

Membership

Lind Import & Export Corp., Ltd.
Free Member ·1YRS
DaLian,LiaoNing
Manufacturer

Main Products: X-ray Detection Device|X-ray Diffractometer (XRD)

Xwboo>Products
Product Categories

Lind Import & Export Corp., Ltd.Free·1YRS

  • E-mail

    han@lind.cn

  • Phone

    8641182767933

  • Address

    Room A1211, Gangwan Street No.20, Zhongshan Dist., Dalian City, Liaoning Province, China

Contact Now

Photon Counting X-Ray Detector XC-Thor Series

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Photon Counting X-Ray Detector XC-Thor Series
Product Details

Product introduction


Product Description

XC-Thor detectors are dual energy, photon-counting,direct conversion, xray sensors in a robust IP67 rated housing. Employing thevery high efficiency direct conversion CdTe-CMOS technology at their core,XC-Thor detectors provide outstanding digital image quality for challengingenvironmental conditions. With the ability to be operated in Frame mode or TimeDelayed Summation (TDS) mode this versatile detector can provide solutions forboth scanning and single imaging requirements.

Core Technology

The XC-Thor range has the additionalbenefit of dual energy acquisition with anti-coincidence technology. Duringdual energy acquisition the energy of the detected photon is compared to twoindependent thresholds that are read out separately. The two energy sets can beused for material separation, opening the door to new imaging techniques inboth medical and industrial x-ray. Anti-coincidence technology allows superiorMTF through attributing single photon signal to the correct pixel

Applicaiton:

With a combination of sensor active areasranging in length of 8cm and 10cm (longer active areas are available onrequest) and widths of 1.25cm and 2.5cm (5cm wide active area is available onrequest). With 0.75mm CdTe standard energy and 2mm CdTe high energy versions,XC-Thor detectors are used in a broad range of applications. Its robust buildmakes its particularly useful in Weld Integrity Inspection where the detectorcan be dropped into an existing mechanical scanning system and Field Inspectionapplications whereenvironmental resilience is important. 

Integration:

The XC-Actaeon is connected to the computervia a GigE interface. The detector comes with a fully flexible softwaredevelopment kit which runs on Windows 7 and upwards. The detector is bundledwith engineering software which exposes the various functionalities available.


 Technical Data:

Dimension L x W x H(mm) : 178 x 140 x 48 ((without optional cooling system)

Temperature control: Internal Peltiertemperature control

X - RAY window: Carbon fiber, 1.5 mm thick

Active area(mm): 80 x 12.8 / 80 x 25.6

Sensor type: Dual-Energy Photon CountingCdTe-CMOS

Sensor thinkness options: 0.75mm : Standardenergy applications/2mm : High energy application

Tile gap: 100μm

Pixel size: 100μm

Tube KV range: up to 160kVp normal up to300kVp with added shielding

Pixel fill factor: 99%

Imaging speed: 300fps ; (TDS): 10,000Line/s

Counter output range: 16bit(Frame)/ 32bit(TDS)

Detective Quantum Efficiency DQE (0) typical : RQA5spectra, 6μGy, SID 1m 0.75mm CdTe >80% 2.0mm CdTe >80%

Modulation Transfer Function MTF: >75% @2lp/mm; >40% @ 5lp/mm

Lag: 0% (after X-ray 6μGy)

Ghosting: <0.1% 1 min after x-rays (6 μGy)


Resolution and DQE for anti-coincidence (CC) on and off