Welcome Customer !

Membership

Shanghai Kminda Tech. Co., Ltd.
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: Linear Vibrating Screen|Circular Vibrating Screen|Cyclone Dehydrator

Xwboo>Products

Shanghai Kminda Tech. Co., Ltd.Free·1YRS

  • E-mail

    info@kminda.com

  • Phone

  • Address

    901B Taiping Financial Building, 488 Yincheng Middle Road, Pudong New Area, Shanghai

Contact Now

Linear Vibrating Screen

Model
Nature of the Manufacturer
Manufacturer
Product Category
Vibrating Screen
Place of Origin
City, Province
Overview
Using high quality fixed-rolled low alloy high strength steel plate, with good toughness, high strength, and good corrosion resistance, low temperature resistance and fatigue resistance; The yield strength is 355Mpa, 1.5 times that of ordinary steel plate.
Product Details

Introduction

KMD has been focusing on research, development and manufacture of vibrating and classifying equipment for mineral industry. In accordance with design of maintenance-free, high reliability and high vibrating strength, LKLB series are Integrated with advanced screening technology and manufacturing process, and suitable for all kinds of harsh conditions in fields such as metallurgy, coal, nonferrous metal, construction material, chemical industry and so on, the service life of main parts can be over ten years, and screen width can be up to 5.1 meters.

As vibration source, the exciters are installed on exciter beam of screen box. While ore material going onto screen deck, the whole vibrating system consist of material and screen box supported by coil springs. Shaft Is driven to rotate by the force from motor driver, and eccentric mass on two axles are rotating reversely through a pair of helical gears trans-milting in the middle. The centrifugal force sometimes superposes and offsets, which makes the vibration system into reciprocating linear vibration, with maximum amplitude up to 16 mm.


Feature and Advantage

Engineered up to 4.3m in width and 9.7m in length;

Using high quality fixed-rolled low alloy high strength steel plate, with good toughness, high strength, and good corrosion resistance, low temperature resistance and fatigue resistance; The yield strength is 355Mpa, 1.5 times that of ordinary steel plate;

The whole design without welding seam, the side plate is finished by laser and plasma system, and the repeated positioning accuracy is up to ±0.1mm. The other accessory plates are blanking by laser, and the repeated positioning accuracy is ±0.02mm, with high product consistency and interchangeability;

The main beam plate is made of high strength steel plate with low alloy, box structure and reinforced steel plate, light weight, full stiffness and high strength;

The welding seam is in accordance with AWS D1.1-2015 welding standard, and through UT flaw detection test, it conforms to grade I welding seam standard;

The whole screen frame adopts imported HUCK rivet hydraulic tension assembly, with large stiffness, high strength, balanced force distribution, large safety factor, novel and beautiful appearance;

The main beam of the screen, the spring support seat and the side plate are connected by steel lock nut, and each nut is calibrated by torque wrench to ensure sufficient design torque;

The whole surface of the screen machine is sprayed with two-component primer + finish paint, the thickness of dry film is higher than 160um, and the contact position of the inner pulp and ore is protected by rubber plate and polyurethane protective layer.


Details Display

DSC1357



Specification

Series

Model

LKLMP

0912

0924




1224

1227

1230

1245


1530

1536




1836

1848





2448




LKLMF

1224

1230

1245

1236

1236G

1536

1536G




1836

1836G

1848




2448




LKLB


1848

1861




2448

2461

2473




3061

3073

3085



3661

3673

3685



4361

4273

4285



4373

4973

4985



5161




Application

Primary sizing

Secondary sizing

Tertiary sizing

De-sliming

Washing

De-watering


Application enterprise: Chengde Jingcheng Mining Group

Ore type: iron tailings

Sieve model: LKLB3661

Process: separation of tailings before transportation

Screen mesh: 2mm/1.5mm 

Site situation:

1. Installation position: Limonite pulp slag removal after washing (outdoor)

2. Working system: 7500h/a, 2 shifts /d, 12h/ shift, working status: continuous work

3. Raw material: trough scrubber overflow pulp, ore density: 3.54t/m³, feeding particle size: -3mm, feeding concentration: 11.05%

4. Processing capacity: 386.43t/h, fluctuation coefficient: 1.2

5. Mesh size: 3mm×3mm

6. Screening form: wet screening

Equipment selection parameters:

1. Processing capacity: 386.43T /h*1.2=463.716t/h

2. Pulp concentration: 11.05%

3. Ore density: 3.54t/m³

4. Pulp volume: 3863.79m³

5. Feeding size: -3mm

6. Grading granularity: 3mm x 3mm

2


Service

KMD linear vibrating screen is a custom solution

KMD linear vibrating screens fully cover existing international specifications and can vary according to your current factory layout and handling capacity

Each application site has specific requirements - To ensure that the screen machine is exactly right for your specific field application and reduce the risk of maintenance requirements or failures, each of our screens can be specially customized to optimize existing processes or match parameters for new projects

Don't compromise on the original size, create a unique screen for your site and team.