Welcome Customer !

Membership

Shanghai AMAZING industrial co., LTD
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: Other Testing Machines|Tensile Testing Machine

Xwboo>Products

Shanghai AMAZING industrial co., LTDFree·1YRS

  • E-mail

    xumin@amazinggroup.cn

  • Phone

    8613311935078 86021-55786669

  • Address

    damai bay industrial zone, pudong, Shanghai

Contact Now

Wire and Cable Smoke Density Tester (EN 50268, IEC 61034, BS 6853)

Model
Nature of the Manufacturer
Manufacturer
Product Category
combustion equipment
Place of Origin
City, Province
Overview
Wire and Cable Smoke Density Tester (EN 50268, IEC 61034, BS 6853)
Product Details

Descriptipon:
This tester comply with GB/T17651.1 ~ 2-1998, IEC61034-1 ~ 2: 1997”Measurement of smoke density of cables and optical cables under specified conditions”.It is used for the measuring power transmission signal or all insulated metallic conductor cables under specific conditions is horizontal burning emitted smoke the transmission rate of the test.The standard IEC 61034 requires smoke box size is 3M³.

Model:FTech-IEC61034

Standards

• IEC60134
Structural features
1, The box is composed of a cube shell with long, wide and high 3000mm + 30mm,and the internal material is SUS 304 stainless steel;
2, The internal toolings are all made of stainless steel,corrosion-resistant;
3, The total area of the vent is 50cm2 ± 10cm2, it is opened during the test,baffle height is 1000mm;
4, Equipped with wire and cable test stands and hang-heavy weights according to standard requirements;
5, Test room has a glass observation window on the door,and the opposite side of the door is provided with a sealed transparent window (minimum 100mmx100mm), which can transmitting light for the measurement system.It’s about 2150mm+100mm high from the ground;
6, Photocell and the light source is positioned at the center of each window on two walls;
Smoke Density Test System
1,Llight source: clean crystal lamps and tungsten halogen lamps, 2900K color temperature; power 100W, DC12V, nominal luminous flux 2000lm ~ 3000lm;
2, Smoke density test: measured optical density range of 0% to 99%;
3, Special light source of smoke density and high resolution photoelectric tube receiver can be installed on the external wall;
4, Test room equipped with doors and windows sealed structure;
5, The standard power is 100W and voltage is DC 12V for the light source;
6, Optical calibration system: 0 to 99% point calibration;
Combustion sources:
1, Ethanol 90% ± 1%; methanol 4% ± 1%; water, 6% ± 1%;
2, Alcohol burning box;
3, The distance between alcohol burning box and the ground is 100mm + 10mm;
Control systems:
1, The computer control system, Labview special test software; artificial intelligence control interface,
2, Power regulator precision is ±0.01V
3, Automatic ignition system, automatic timing;
4, Experimental data can be automatic storage, are free to query;
5, With timing reminders;

Specifications

ModelFTech-IEC61034
Size3,450(W)×3,160(D)×3,450(H)mm
Table size600(W)×750(D)×1,600(H)mm
PowerAC 220V, 50/60Hz, 20A
Weight2,500kg
InstructionsProvided
ToolComputers, compressed gases, vacuum cleaner