- Applied to signal synchronization acquisition;

- Anti-Shock design, best for vehicle crash tests;
- 2chs trigger input and 8chs trigger output;
- Built-in battery and charging management;
- Battery On, Remaining Capacity and Status LED ind
- All input and output are isolated and ESD protection
Trigger distributor box TRG-8S is mainly designed for vehicle crash test. It can also be used for multi-devices synchronous trigger during tests. The trigger input is usually connected to a ribbon switch or a photoelectric switch. Trigger output is connected to data acquisition, airbag squib device, cameras, etc. All 8 internal channels are optically isolated. And trigger input is active if any one trigger input got signal. Built-in battery is UPS function, it is no matter the external power is connecting or not. The battery on button is locked after run to avoid the influence of shock.
| Name | Unit | Value |
| Trigger input | channels | 2 |
| Input type | Switch (TTL optional) | |
| Trigger out | channels | 8 |
| Output type | Switch (TTL optional) | |
| Output driver | mA | 50 |
| Consumption | W | <5 |
| Power voltage | V | 12 |
| Battery work time | min | >300 |
| Trigger delay | us | <50 |
| Input connector | LEMO | FGG.1B.305 |
| Output connector | LEMO | FGG.1B.302 |
| Indicator | LED | Capacity |
| Indicator | LED | Trigger out |
| Mounting | / | 6×M4 |
| Material | / | Al. Alloy |
| Weight | grams | 525 |
| Dimension | mm | 230×64×43 |
Dimension:


Battery info.
| Capacity | 3400mAh |
| Rated Voltage | 12V |
| Over temp. Protection | Yes |
| Short Protection | Yes |
| Charging Voltage | 9V-18V |
| Charing current Max. | 2A |
![]() | Trigger Distribution Box TRG-8S-EN |
,





