Welcome Customer !

Membership

Shenzhen Huayuan Technology Industry Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 电源测试设备

Xwboo>Products

30V Battery Module Aging Cabinet

Model
Nature of the Manufacturer
Other
Product Category
Battery recharging and recharging cabinet
Place of Origin
City, Province
Overview
30V Battery Module Aging Cabinet
Product Details

1. The system has better flexibility for the expansion of power cell testing, so as to facilitate users 'possible future system expansion and adjustment.
2. Can meet the requirements of various standard dynamic testing procedures to meet the need for battery testing of electric vehicles
3. In a test process, the test step can reach 255 steps, providing users with a wide range of features
4. The test scheme is flexible and convenient to program. You can use variables to participate in the programming, implement various combination test schemes, and achieve various conditions for simulating the car operation.
5. Provide data analysis curves such as charge and discharge efficiency, capacity attenuation rate, current and voltage characteristics, and facilitate conversion to EXCEL documents for preservation and printing
6. Has the function of cutting off the switch in an emergency, turning off the power automatically after power off, and automatically loading connection and disconnection.
The transistor linear amplifier circuit structure is adopted to output pure and stable sinusoidal wave. After special treatment, it has small harmonic component, no interference, high accuracy and low noise.

With advanced direct digital frequency synthesizer (DDS) waveform generation technology, the frequency stability is high and the continuity is good.

The measurement accuracy is high, and it is suitable for the measurement of current sinusoidal half-wave and its similar waveforms with DC component.

Provide embedded intelligent PC monitoring system;

Full range adjustable output voltage 0-150V, 0-300V, (0-600 V optional) step 0.1V;

Output frequency 45-120 Hz (40-500 Hz optional), step 0.1 Hz;

Output current limiting function;

With three sets of memory, the commonly used parameters (voltage V, frequency F, current I) can be stored for easy use.

It has RS232C, RS485, GPIB communication interface, and the instruction execution time is less than 1 ms.

Protection mode: Overvoltage, Overcurrent, Overload, Short Circuit, Current Limitation, etc.

Provide RMS voltage, RMS current, active power, frequency, power factor and other reading values.

For 99% unloading, the voltage stabilization reaction time is less than 2ms, the overloading capacity is strong, and the instantaneous current can withstand three times of the rated current.

Standard 19 inch chassis, suitable for cabinet installation.
Similar Product Recommend