Linear Programmable Variable Power Supply
The transistor linear amplifier circuit structure is adopted to output pure and stable sinusoidal wave. After special treatment, it has small harmonic component, no interference, high accuracy and low noise.
With advanced direct digital frequency synthesizer (DDS) waveform generation technology, the frequency stability is high and the continuity is good.
The measurement accuracy is high, and it is suitable for the measurement of current sinusoidal half-wave and its similar waveforms with DC component.
Provide embedded intelligent PC monitoring system;
Full range adjustable output voltage 0-150V, 0-300V, (0-600 V optional) step 0.1V;
Output frequency 45-120 Hz (40-500 Hz optional), step 0.1 Hz;
Output current limiting function;
With three sets of memory, the commonly used parameters (voltage V, frequency F, current I) can be stored for easy use.
It has RS232C, RS485, GPIB communication interface, and the instruction execution time is less than 1 ms.
Protection mode: Overvoltage, Overcurrent, Overload, Short Circuit, Current Limitation, etc.
Provide RMS voltage, RMS current, active power, frequency, power factor and other reading values.
For 99% unloading, the voltage stabilization reaction time is less than 2ms, the overloading capacity is strong, and the instantaneous current can withstand three times of the rated current.
Standard 19 inch chassis, suitable for cabinet installation.
The transistor linear amplifier circuit structure is adopted to output pure and stable sinusoidal wave. After special treatment, it has small harmonic component, no interference, high accuracy and low noise.
With advanced direct digital frequency synthesizer (DDS) waveform generation technology, the frequency stability is high and the continuity is good.
The measurement accuracy is high, and it is suitable for the measurement of current sinusoidal half-wave and its similar waveforms with DC component.
Provide embedded intelligent PC monitoring system;
Full range adjustable output voltage 0-150V, 0-300V, (0-600 V optional) step 0.1V;
Output frequency 45-120 Hz (40-500 Hz optional), step 0.1 Hz;
Output current limiting function;
With three sets of memory, the commonly used parameters (voltage V, frequency F, current I) can be stored for easy use.
It has RS232C, RS485, GPIB communication interface, and the instruction execution time is less than 1 ms.
Protection mode: Overvoltage, Overcurrent, Overload, Short Circuit, Current Limitation, etc.
Provide RMS voltage, RMS current, active power, frequency, power factor and other reading values.
For 99% unloading, the voltage stabilization reaction time is less than 2ms, the overloading capacity is strong, and the instantaneous current can withstand three times of the rated current.
Standard 19 inch chassis, suitable for cabinet installation.