FET-5.6 Vortex flaw detector
FET-5.6 is a eddy current tester with single sensor input and single channel double frequency,it can connect sensor like types of round 、rotating and probe,suitable for installing on automatic or semi-automatic testing conductor to do crack detection、heat treatment inspection。
Single probe、double frequency
Every testing frequency has different warning output
Configure probe connection
Support rotating probe drive
Filter rang is wide,suitable for dynamic testing
Flexible I/O interface connecting to processing controller
Multiple language user interface
Set and signal tracking can be saved
Computer software,used for transferring testing result to computer
Operating frequency
Common:10Hz-10MHz
Rotating mode:10KHz-2MHz
Gain
Super accurate set,it can simultaneously or individually adjust X and Y controlling value
-8 dB to 96 dB (0.1dBstepping)
Input gain option 0db or 14db
Probe drive -8 dB, 0 dB, and +98 dB
Low pass /high pass filter
Low pass:3Hz-2KHz ,2000 stepping
High pass:DC-1.99KHz, 500 stepping
Alarm mode :+,- classification, sector and square strobe , twinkle LED, sound alarm
phase position
0-359.9° (0.1° stepping changeable)
Data saving
Accommodate 50 recording line and 50 sets, 28 word characters,and time and data marking
Dynamic data can be saved and playback
Probe compatibility
Absolute Locator probe (100 ohm impedance)
Absolute standard probe (50ohm)
Bridge type probe
Reflection-type probe balanced load
Balanced load
Manual or automatic 。optional
Output
Backplate interface
Probe 1,used for common,rotation
Probe 2,used for probe 1 common or absolute load
ABS probe,equipped with BNC connector with absolute probe
Analog output :standard I/O, 15 needle D type connector
Remote control input balance calibration、freeze、empty
External LED and relay driver output
BNC connector analog output and remote input
Attention:BNC output connector is parallel to standard I/O connector
Compatible with Windows software , convenient to report and print
Working temperature:-15~55℃
Saving temperature :-20~60℃
relative humidity :not exceed 85%
working voltage :AV220V/DC24V