Welcome Customer !

Membership

Jinan Dwin Technology Co.,ltd.
Free Member ·1YRS
JiNan,ShanDong
Manufacturer

Main Products: Laser Cutting Machine|Laser Engraving Machine|Plasma Cutting Machine

Xwboo>Products

Jinan Dwin Technology Co.,ltd.Free·1YRS

  • E-mail

    matthew@dwincnc.com

  • Phone

    86-0531-88601773

  • Address

    Room 502, Commercial office building B, Lushangshengjing Square, Lixia District, Jinan, Shandong, China

Contact Now

DW3020 Square round plasma cutting machine

Model
Nature of the Manufacturer
Manufacturer
Product Category
Plasma cutting machines
Place of Origin
City, Province
Overview
1. This machine is used for metal squareround tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes metal sheet.2. The linear rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching.3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training.
Product Details

Features

1. This machine is used for metal square&round tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes’ metal sheet.
2. The linear rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching.
3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training.
4. Driving system is servo or stepper drive, you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time
5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting.

Technical parameter

Description

DW3020 (Length 6000 is Optional. Diameter 300mm-500mm is optional)

Working Size

200(Diameter)*3000mm(Length)

Z Axis Clearance

150mm (200 And Higher Is Optional)

Table Type

Chuck rotary

Transmission System

Rack Pinion And Hiwin/PMI Linear Rails For X/Y

Driving System

Servo motor( YASKAWA/PANASONIC ,also according to your needs and budget.)

Max. Cutting Speed

12000mm/Min(different configuration and different material and thickness speed is different)

Max. Travelling Speed

30000mm/Min(different configuration speed is different)

Working Voltage

380V/3ph(220V/3ph is optional)

Plasma Generator

Huayuan China and USA power as your requirements

Arc Mode

Jiaoda fangling

Output Current

63/100/120A/160A/200A China

(45/65/85/105/125/200A USA)

Max. Cutting Thickness

6/15/18/20/30mm

(This is approximate,It also according to power and kinds metal)

Operating System

JiaoDa fangling FX430A controller

(Professional for tube cutting)

Working Material

Steel, Aluminum, Galvanized Sheet, Titanium Plate, Platinum Plate and almost all of the metal square tube/Circle tube