IND-GSM0817004 use diameter of 8.0 mm micro stepper motor and 10*12*9mm precision metal reduction gearbox, gear ratio is 1:150.
Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor rotation angle resolution can reach 0.05~6 degrees. This 8mm stepper motor uses with the most advanced equipment in the international processing related parts. So it has the high precision, high efficiency, low noise, and adopt reasonable and reliable technology process, make the product stability.
Electrical performance for 8mm Stepper Motor with Gear Reduction
Model
motor size (mm)
Rated Vol.
Resistance
Step angle
Geat ratio
Pull in torque
Diameter
Gear box length
V DC
Ω
/
gf
IND-GSM0817004
8.0
9.0
3.3
21.0
18°
1:150
>200
Our customized services
Our standard shaft type is round type, D-cut type, screw type and I-cut type.
The connection types of input method is Pin type, FPC, PCB and lead wire etc.
Both Shaft type and connection type are customizable, as well as fixture covers.
Equipment show
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of motor is over 80 million.
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
50 Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
What kinds of stepping motors are there?
There are three types of stepping motors: permanent magnet (PM), reactive (VR) and hybrid (HB)
Permanent magnet stepping is generally two-phase, with small torque and volume, and the stepping angle is generally 7.5 degrees or 15 degrees.