IND-GSM1020005 use diameter of 8.0 mm micro stepper motor and 10.1 mm, gear ratio is 1:50.
Electrical performance for 5V DC Micro Geared Stepper Motor
Model
motor size (mm)
Rated Vol.
Resistance
Step angle
Geat ratio
Pull in torque
Diameter
Over length
V DC
Ω
/
gf
IND-GSM1020005
10.0
10.1
5.0
18.0
18°
1:50
>250
Equipment show
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of motor is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
What is holding torque (HOLDING TORQUE)?
Holding torque (HOLDING TORQUE) refers to the torque that the stator locks the rotor when the stepper motor is energized but not rotating. It is one of the most important parameters of a stepper motor, usually the torque of a stepper motor at low speed is close to the holding torque. Since the output torque of a stepper motor decays continuously with the increase of speed, and the output power also changes with the increase of speed, the holding torque has become one of the most important parameters to measure the stepper motor. For example, when people say a 2N.m stepper motor, it refers to a stepper motor with a holding torque of 2N.m unless otherwise specified.