The standard shaft type is round type, D-cut type, screw type and I-cut type.
The connection types of input method is Pin type, FPC, PCB and lead wire etc.
Both shaft type and connection type are customizable, as well as fixture covers.
What is stepper motor?
Stepper motor is an open-loop control element stepping motor that converts electrical pulse signals into angular displacement or linear displacement.
In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor Rotate a fixed angle in the set direction.
The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of all motors is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
Does the subdivision number of the subdivision drive represent the accuracy?
The subdivision technology of the stepper motor is essentially an electronic damping technology (please refer to the relevant literature). Its main purpose is to reduce or eliminate the low-frequency vibration of the stepper motor. Improving the operation accuracy of the motor is only a side function of the subdivision technology. For example, for a two-phase hybrid stepping motor with a step angle of 1.8°, if the subdivision number of the subdivision driver is set to 4, then the motor's operating resolution is 0.45° per pulse. Can the accuracy of the motor reach or approach 0.45°, also depends on other factors such as the subdivision current control accuracy of the subdivision driver. The precision of subdivision drivers of different manufacturers may vary greatly; the greater the subdivision number, the more difficult it is to control the precision.