Technical performance of this 12 V DC Chinese Stepper Motor
Step angle: 18°
Voltage: 12.0 V DC
Resistance: 15.0 Ω
Drive mode: Bipolar
Pull in torque:>20.0 gf
Dia: 10.0 mm
Overlength: 19.30 mm
The standard shaft type is round type, D-cut type, screw type and I-cut type. The connection types of input method is Pin type, FPC, PCB and lead wire etc. Both shaft type and connection type are customizable, as well as fixture covers.
What is stepper motor?
Stepper motor is an open-loop control element stepping motor that converts electrical pulse signals into angular displacement or linear displacement.
In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor Rotate a fixed angle in the set direction.
The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of all motors is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
Also known as pulse motor, stepping motor based on the basic principle of electromagnet, it is a free swing electromagnet, its action principle is depend on the change of the air gap permeance to produce electromagnetic torque, work principle is the use of electronic circuit, direct current (dc) into multiphase sequential control of time-sharing power supply current, in this current for stepper motor power supply, stepper motor can work normally.
Two technologies greatly affect the comprehensive performance of stepper motor:
I. Stepper motor acceleration and deceleration process control technology
If the step pulse changes too fast when starting or accelerating, the rotor can't follow the change of electrical signal due to inertia, resulting in stalled or out of step, and the overstep may occur when stopping or decelerating for the same reason.In order to prevent stalling, out-of-step and overstep, and to improve the working frequency, it is necessary to control the speed of stepping motor.
Second, the stepper motor subdivision control technology
It is to control the current in each phase winding to make them rise or fall according to a certain law, that is, a number of stable intermediate current states will be formed between zero current and maximum current, and the corresponding direction of the synthetic magnetic field vector will also have a number of stable intermediate states, and rotate according to the subdivision step.