Technical performance of this China Manufacture 8 mm Stepper Motor
Step angle: 18°
Voltage: 3.3 V DC
Resistance: 21.0 Ω
Drive mode: Bipolar
Pull in torque:>3.0 gf
Dia: 8.0 mm
Overlength: 8.3 mm
The standard shaft type is round type, D-cut type, screw type and I-cut type. The connection types of input method is Pin type, FPC, PCB and lead wire etc. Both shaft type and connection type are customizable, as well as fixture covers.
INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of all motors is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
Stepper motor is a kind of electric pulse into the angular displacement of the actuator.In general terms, when the stepper driver receives a pulse signal, it drives the stepper motor to rotate in a set direction at a fixed Angle (step Angle).You can control the angular displacement by controlling the number of pulses, so as to achieve the purpose of accurate positioning;At the same time, you can control the speed and acceleration of motor rotation by controlling the pulse frequency, so as to achieve the purpose of speed regulation.