Technical performance of this Gear Head Driver Stepper Motor
Step angle: 18°
Voltage: 5.0 V DC
Resistance: 15.0 Ω
Drive mode: Bipolar
Pull in torque:>12.0 gf
Dia: 10.0 mm
Overlength: 10.70 mm
What is stepper motor?
Stepper motor is an open-loop control element stepping motor that converts electrical pulse signals into angular displacement or linear displacement.
In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor Rotate a fixed angle in the set direction.
The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of all motors is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
The programmable robot servo is a position (Angle) servo actuator for control systems that require constant change of Angle and can be maintained.The robot steering gear is programmed to turn the steering wheel through a momentary blocking torque, which lasts for a short time.The earliest remote control toys, such as aircraft, submarine model, remote control robots have been widely used.Nowadays, through technological innovation and upgrading of processing technology, steering gear has been more and more widely used in all walks of life.