Technical performance of this High Quality 5 V Micro Stepper Motor
Step angle: 18°
Voltage: 5.0 V DC
Resistance: 15.0 Ω
Drive mode: Bipolar
Pull in torque:>12.0 gf
Dia: 10.0 mm
Overlength: 10.15 mm
What is stepper motor?
Stepper motor is an open-loop control element stepping motor that converts electrical pulse signals into angular displacement or linear displacement.
In the case of non-overload, the motor speed and stop position only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. When the stepper driver receives a pulse signal, it drives the stepper motor Rotate a fixed angle in the set direction.
The angular displacement can be controlled by controlling the number of pulses, so as to achieve the purpose of accurate positioning; at the same time, the speed and acceleration of the motor rotation can be controlled by controlling the pulse frequency, so as to achieve the purpose of speed regulation.
INEED a professional high-tech enterprise in micro-motor research and development, production and sales. The main products are brush DC motor, brushless DC motor, stepper motor, DC gear motor, and the application range is extremely wide, including aviation model, intelligent robot, electric vehicle, power tool, security equipment, household appliances, automation
Owning the most advanced manufacture device and testing equiments as well as factory area more than 100,000㎡, the annual output of all motors is over 80 million.
Our certificate
Our advantages
1) Continuously improve production automation
35 of 47 existing process has been realized automation, automation rate: 75%.
2) No pure manual work
For process that fail to use automate, jigs must be used to assist in the operation.
3) Optimize the production jigs
Design and manufacture engineering fixture and equipment by ourselves.
Including 30% equipment, 90% jigs to reduce lead time and develop period.
4) 40 Continuously improve production efficiency
Efficiency increased by 10% every year in recent years.
5) Continuously reduce quality accident
Strengthen quality management beforehand.
Periodically replace production tools and jigs.
The stepper motor cannot be connected to the power supply directly, so a special stepper motor driver must be used.The driver consists of pulse generation control unit, power drive unit, protection unit and so on.The driving unit is directly coupled to the stepping motor, which can also be understood as the power interface of the stepping motor microcomputer controller.
How do you implement driver control?
As follows: feed pulse → pulse mixing circuit → pulse addition and subtraction distribution circuit → acceleration and deceleration circuit → ring distributor → power amplifier → to stepper motor winding
1. The pulse hybrid circuit mixed pulse feed, manual return to the origin, error compensation, etc. into positive or negative pulse feed signals;
2. The addition and subtraction pulse distribution circuit combines the positive or negative pulse into a single direction feed pulse;
3. The adjustment pulse of acceleration and deceleration circuit is the pulse that conforms to the acceleration and deceleration characteristics of stepping motor. The frequency change should be stable, and the acceleration and deceleration have a certain time constant;
4. The ring divider converts the passing pulse into the level signals that control the on and off of the stepping motor stator winding;
5, the power amplifier ring distribution output of mA level current for power amplification, generally by the preamplifier and power amplifier.