Outdoor 36kV Vacuum Circuit Breaker

NegotiableUpdate on October 02

Model

Nature of the Manufacturer: Other

Product Category: The Outdoor Switchgear

Place of Origin: City, Province

Online Consult Contact Information

Overview

36kV outdoor HV porcelain type vacuum circuit breaker with IEC 62271 standard. It is designed as a AC three-phase 50Hz and rated voltage 36kV equipment that is mainly applied to rural and urban power grids with 36kV distribution system for the use of opening and closing of load current, overload current and short circuit current.

Product Details

36kV outdoor HV vacuum circuit breaker is designed as a AC three-phase 50Hz and rated voltage 36kV equipment that is mainly applied to rural and urban substation power grids with 36kV distribution system for the use of opening and closing of load current, overload current and short circuit current. The outdoor adopts porcelain as insulation material which has advantages of anti-condensation, aging resistance and temperature resistance.

Features of the outdoor 36kV vacuum circuit breaker :

It is suitable for column installation or substation applications. The insulation material is porcelain. Vacuum arc-extinguishing chamber, insulating rod, connecting rod and three-pole epoxy pillar are mounted in mechanism casing. The moving end of arc-extinguishing chamber is connected to the output shaft of the mechanism through insulatiing rod.

Waterproof box design and heater design which prevent the control room from moisture.

High reliability, small volume, long service life.

Comply with IEC 62271-100 standard.

Use of the environment:

Ambient temperature: -40 ℃~ +85 ℃, the daily average temperature: 25 ℃

Altitude: ≤3000m(in excess of the value of technical discussions with the Division I)

Wind speed:35m/ s

Icing thickness: 10mm

Earthquake intensity: ≤8 degrees

Degree of ambient air contamination level not greater than: Ⅲ level

Daily average ambient air relative humidity ≤ 95%, on average ≤ 90%

Saturated vapor pressure of daily mean values ≤ 2.2 × 10-3Mpa, on average ≤ 1.8 × 10-3Mpa

Circuit-breaker on Column		RVB-24	RVB-36	RVB-40.5
Standard	IEC 62271-100	√	√	√
Rated voltage	(kV)	24	36	40.5
Rated insulation voltage	(kV)	24	36	40.5
Power frequency withstand	(kV /min)	70 (dry) / 70 (wet)	95 (dry) / 95 (wet)	95 (dry) / 95 (wet)
Impulse withstａnd voltage	(kV peak)	170	170	195
Rated frequency	(Hz)	50-60	50-60	50-60
Rated normal current	(Amps)	2500	2500
Rated symmetrical breaking capacity	(kA r.m.s)	25 25 31.5	25 25 31.5	31.5 31.5
Rated short time withstａnd current (3s)	(kA r.m.s)	25 25 31.5	25 25 31.5	31.5 31.5
Asymmetrical breaking capacity	(% of d.c Component at t=45ms)	35	35	35
Rated making capacity	(kA peak)	63 63 80	63 63 80	80 80
Operating sequence	0-0.3sec- CO - 3 Min -CO & CO-15sec- CO	√	√	√
Opening time	(ms)	45 ± 10	45 ± 10	45 ± 10
Capacitor current switching capacity	(Amps)
Single bank - C2 class		400	400
Back to back - C2 class				750
Arcing time	(ms)	5-15	5-15	5-15
Total breaking time	(ms)	50-60	50-60	50-60
Closing time	(ms)	75 ± 10	75 ± 10	75 ± 10
Over all dimensions	On Frame (H x L x P) mm	(3090-3840) x 900 x 686
Weight	(kg)	850/900	850/900	900
N2 gas absolute pressure	(kPa) for Anticondensation	150	150	150
Operating temperature #1	℃	-25…+40	-25…+40	-25…+40
Tropicalization	IEC:60068-2-30,721-2-1	√	√	√
Electromagnetic compatibility	IEC 62271-1,61000-6-2,61000-6-4	√	√	√
Solar radiation	(W/m2)	1000	1000	1000
Presence of pollution	IEC 60815-Table 1	Level III	Level III	Level III
Creepage distance	(mm/kV)	25 #2	25 #2	27.5 #2
Ice coating	(mm)	10
Wind speed	(m/s)	34
Earth quake resistance	(g)	0.6
Surface force on the terminal	Logitudinal xTransversal x Vertical ( N)	750 x 500 x 750