RLW series pole mounted vacuum LBS

2. Main new advantages of RLW (RCS-3N)

2.1 The VLBS tank feature:

The Vacuum load break switch tanks are manufactured from 304＃grade stainless steel and standard tank are powder coated a light grey colour. Whole load break switch IP65 protection class, equipped with a auxiliary plug to connect with load break switch controller by control cable, Diameter Max22mm, up to 6 M length(8M for special).It can performance serve more than 20 years long term under heavy duty circumstance.

2.2 The vacuum embedded pole feature:

The load break switch’s vacuum interrupter insert in an epoxy resin solid pole, and external coated with a high reliable, stable material: Fluorocarbon silicone rubber (γ-trifluoro propyl methyl polysiloxane) With excellent electric insulation, weather resistance, ozone, biological inertia, can be stａnd under the long-term use in -55 ~ +200 ℃.

2.3 Creepage Distances of RLW (RCS-3N)

T to T* -----Terminal to terminal creepage

T to G/E* -----Terminal to ground/earth creepage

3. Optional for difference functions of primacy design

3.1 Optional for Difference configurations of primacy design (Interruptering pole)

Basic VI pole,BIL170kV                      VI pole with CT,BIL170kV

Note:RLW (RCS-3N) is ready design for primacy optional :Standard type and special type with CT for relay protection and current measuring purpose.

3.2 Optional for disconnector switch ( Special requirement using combination switch)

With manually and motorized double function.

Note:
This disconnector switch is ready design for RLW (RCS-3N) primacy optional.This is special design for combination switch application.

3.3 Simple relay protection device (mounted inside of mechanism tank)

Type P-1 protector is a composite protection device for the power system while inrush current and short circuit, to avoid closing inrush and during the operation of the surge protection and short circuit quick break.
Main technical parameters:
1, Rated current: AC5A; Action current error: ± 5%; P-1 controller
2, Delay time: the time limit set, the inverse time adjustable range 20ms ~ 5120ms;
3, Optional for remote Controller: Distance100 m or 1000 m.

3.4 Expanding for sectionalizer switch protection device

3.4.1Type P-2 protector have the same relay protection functions as P-1.
3.4.2 The additional functions:
3.4.3 With zero-sequence protection function, be able to judge the failure of sensitive current earthing fault.
3.4.4 Cycle record a variety of line fault, save the fault time current, non-volatile, and a maximum storage of 64, you can query the local liquid crystal display, but also by the background software queries. P-2 Controller
3.4.5 All the way to the wireless network interface cards (optional), at a distance within 200 meters of the machine can communicate with the computer's wireless network;
3.4.6 RS232 communication port, connection with the GSM, GPRS / CDMA communication module to build the distribution network automation system;
3.4.7 Communication protocols to support the Statute of the IEC870-5-101.

Note:This is expanding products for LBS with CT protection.More information PLS consult with Roclwill’s Engineer and Sectionalizer switch technical manual.

3.5 Sheet for define of difference function switch

Note: Special order or requirement can consult with Rockwill’s Engineer.

4. Overview of vacuum load break switch mechanism

4.1 The feature of mechanism frontal side
4.1.1 The mechanism for RLW(RCS-3N) is mounted inside a stainless steel tank. With IP65 class protection.
4.1.2 The tank is provided with visible ON/OFF indicator and a M12 grounding bolt.
4.1.3 The tank is pre-provided with cable connector for connecting to controller box or junction box..
4.1.4 RLW and (RCS-3N) type load break switch is provided with optional for Manual or Motorize charging type mechanism. Mechanical life 10,000 times design, free maintenance for 2000 times.
Operating voltage optional:
-24 Vdc,
-48 Vdc,
-110 Vdc and 110Vac,
-220 Vdc and 220Vac.

Note:For operating voltage requirement should indicated before order.

More information Pls consult with Rockwill’s Engineer.

5. Overview of junction box and controller for LBS

5.1 The feature of simple function junction box（Type J-1 junction box）
The type J-1 box is made by stainless steel with IP54 class protection.The J-1 junction box is only for connection with control centre.Its terminals and wires in side without switches Or relay components. Insulation level P fr =3000V.Terminal rating current = 10A.
Note:1. This junction is basic using for LBS without CT and DS terminals. 2. Its only for connection with centre controlling wiring.

5.2 The feature of simple control box（Type C-2 controller）

The Type C-1 controller box is made by stainless steel with IP54 class protection design. With controlling and remote and local transform  function. Can be setting between HV switch(RLW or RCS-3N) and Control centre for connection and controlling using.The wiring components of C-1 type box is including pushbutton, rotate switch , MCBs, and some signal lights, etc.
Note:
1. Per IEC62271-200 Standard.
2. This controller can be mounted with simple relay protector.
3. Heater and humidity controller is optional.
4. For this controller using, the LBS can be equipped with CTs.

5.3 The feature of expanding intelligence controller.（P-2 Controller）
5.3.1Type P-2 protector have the same relay protection functions as P-1.
5.3.2 The additional functions:
5.3.3 With zero-sequence protection function, be able to judge the failure of sensitive current earthing fault.
5.3.4 Cycle record a variety of line fault, save the fault time current, non-volatile, and a maximum storage of 64, you can query the local liquid crystal display, but also by the background software queries.
5.3.5 All the way to the wireless network interface cards (optional), at a distance within 200 meters of the machine can communicate with the computer's wireless network;
5.3.6 RS232 communication port, connection with the GSM, GPRS / CDMA communication module to build the distribution network automation system;
5.3.7 Communication protocols to support the Statute of the IEC870-5-101.
Note:
This is expanding products for LBS with CT protection. More information PLS consult with Roclwill’s Engineer and Sectionalizer switch technical manual.

6.1 Basic of switch specification

 Note:
Electrical endurance is base on the VI design.
Higher requirement for breaking and making can consult with Rockwill’s engineer.

6.2 Special requirement for increasing electrical characters of switch

Note:
More information needed Pls check with RCS-3 switch

7.1 Pole mounted LBS-Basic switch 12kV

12kV basic switch. –without CTs, and disconnector switch

Combination switches with disconnector switch

Optional for surge arresters.

Optional for crrent transformers.

Note: More information needed Pls consult with Rockwill.

7.2Pole mounted LBS-Basic switch 15/27kV

15/27kV basic switch- without CTs and disconnector switch. With phase distance 360mm.Expanding to 38kV needed, increasing the phase distance to 435mm.

Combination switches with disconnector switch

Optional for surge arresters.

Optional for crrent transformers.

Note:More information needed Pls consult with Rockwill.