Welcome Customer !

Membership

Ningbo Fibconet Communication Technology Co., Ltd
Free Member ·1YRS
NingBo,ZheJiang
Manufacturer

Main Products: Optical Branch Splitter|Cable Distribution Box|Fiber Optic Cable|Other Wires & Cables

Xwboo>Products

10Gbps SFP+ Active Optical Cable Patch Cord

Model
Nature of the Manufacturer
Manufacturer
Product Category
1. Fiber Optic SFP Modules
Place of Origin
City, Province
Overview
100GbpsSFP+ Active Optical Cable (AOC) is a 10Gbps solution to10G Ethernet, and datacenter. The integrated cable transmits 10Gbps data in each direction over MMF with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight. Applications Datacom 10G Ethernet Other high-throughput data transmission network Features 10Gb/s active optical cable up to 100m OM2 MMF 850nm VCSEL and PIN receiverSingle 3.3V power supply Operating Case Temperature: -5~75ºC Hot pluggable LowPowerConsumpti......
Product Details

Mechanical Dimensions

Table.3 Transmitter Specification (Optical)

Parameter Symbol Min. Typ. Max. Unit Note
Average Output Power Po -5 -1 dBm
Disable Power Poff -40 dBm
Extinction Ratio ER 3.5 dB
Output Centre Wavelength λc 840 860 nm

Table.4 Transmitter Specification (Electrical)

Parameter Symbol Min Typical Max Unit
Data Input Swing Differential VIN 200 700 mV
Input Differential Impedance ZIN 90 100 110 Ω
Transmit Disable Input High VIH 2.0 Vcc+0.3 V
Low VIL 0 0.8 V

Receiver Specification (Optical)

Parameter Symbol Min Typical Max Unit note
Centre Wavelength λc 840 850 860 nm
Receiver Sensitivity Sen -11 dBm 1
Receiver Overload Psat 0.5 dBm 1
LOS De-Assert LOSD -15 dBm
LOS Assert LOSA -30 dBm
LOS Hysteresis 0.5 4 dB
Receiver Reflectance Rrx -12 dB

ESD

This transceiver is specified as ESD threshold 1kV for high speed pins and 2kV for all other electrical input pins, tested per MIL-STD-883, Method 3015.4 /JESD22-A114-A (HBM).  However, normal ESD precautions are still required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment.

LASER SAFETY

This is a Class 1 Laser Product according to IEC 60825-1:1993:+A1:1997+A2:2001.  This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated