Lithtech TE2000 2.4kWh Solar Battery Storage 48V 50Ah Battery Energy Storage
The TE2000 battery system uses lithium iron phosphate as the battery anode material and is equipped with a high-performance BMS to effectively manage the battery cells. The system has the following characteristics:
Meet European ROHS regulations, pass SGS certification, use the best non-toxic and pollution-free battery;
The battery anode is made of lithium iron phosphate (LiFePO4) material, which has good safety performance and long cycle life;
Adopt high-performance BMS battery management mode, with over-discharge, over-charge, over-current, temperature and other protection functions;
With charge and discharge automatic management and single cell balance function;
Fully intelligent design, equipped with a centralized monitoring module, with three remote (telemetry, remote signaling and remote control) functions;
Flexible configuration, multiple system units connected in parallel can extend the power supply time of the system;
Self-cooling method, the whole system has extremely low noise;
The battery has less self-discharge, and it can be recharged for up to 10 months during storage; no memory effect, shallow charging and discharging;
Wide temperature working range, -20 ℃ ~ + 55 ℃, good cycle life and discharge performance at normal temperature;
Small battery size and light weight.
Lithtech TE2000 48V 50Ah Lifepo4 solar storage battery |
| Nominal voltage | 48V |
| Dimensions | 482*420*90mm |
| Nominal capacity | 50Ah |
| Weight | 25.5Kg |
| Capacity@20A | 150min |
| Terminal Type | Connector |
| Energy | 2.4Kwh |
| Case material | Steel |
| Resistance | ≤30mΩ |
| Enclosure Protection | IP20 |
| Efficiency | 99% |
| Cell Type | Prismatic |
| Self discharge | ≤3.5% per month |
| Chemistry | Lifepo4 |
| Maximum Modules in parallel | 15 |
| Configuration | 15S1P |
| Maximum discharging current | 50A |
| BMS discharge current cut-off | 130A±20A |
| Peak discharge current | 100A ≤3s |
| Cycle life Warranty | 6000+ 7years+3 years |
