Product Description:
Ws-6500 series - AC electronic load shall be mainly used for on-line commissioning, off-line detection, aging test and function verification of AC charging pile products, which can truly simulate the charging process and various faults, and avoid inconvenient test use, incomplete test content and inability to simulate real faults caused by using real electric vehicles as detection devices, At the same time, it can also avoid the damage of the test vehicle caused by the failure of the charging pile.
Our equipment can accurately measure the output power and load capacity of the charging pile.
Function introduction:
1. During the project acceptance of newly installed AC charging pile equipment, check whether the output power of DC charging pile equipment and battery can meet the design requirements.
2. Daily maintenance and routine inspection of AC charging pile equipment.
4. The test data of important parameters such as power, voltage and current are clear at a glance.
5. All high efficiency electric heating elements comply with UL safety specifications.
6. It has fan fault detection, overvoltage, overcurrent, leakage and other protection functions.
7. Programmable support RS485 communication interface, Modbus RTU standard communication protocol.
Application fields:
Test the output power and load capacity of AC charging pile.
|
Product name | Ws-6500 series AC electronic load |
Product model | WS-6505 | WS-6509 | WS-6550 |
Rated voltage | Ue=AC220V | Ue=AC220V | Ue=AC380V |
Total power | 5KW | 9KW | 50KW |
Load properties | Pure resistance (power factor 1.0) | Pure resistance (power factor 1.0) | Pure resistance (power factor 1) |
Current range | 0.1A~22A | 0.1A~45A | 0.1A~75A(per phase) |
control mode | Local: None | Local: None | Local: 10.2-inch touch screen |
Remote: RS485 | Remote: RS485 | Remote: RS485 |
| Communication protocol: Modbus RTU | Communication protocol: Modbus RTU | Communication protocol: Modbus RTU |
Panel layout | power switch | Fault alarm | power switch | Fault alarm | power switch | Fault alarm |
Fault reset | Emergency stop switch | Fault reset | Emergency stop switch | Fault reset | Emergency stop switch |
Electric parameter monitoring instrument | Electric parameter monitoring instrument | Local remote | interface |
Loading accuracy | ≤1%F.S. |
Automatic compensation | If the error range of the set value is exceeded under the constant power or constant current mode, the system will automatically compensate to realize the high-precision regulation of the load |
Voltage resolution | ≤1%F.S. | ≤1%F.S. | ≤1%F.S. |
Current resolution | ≤1%F.S. | ≤1%F.S. | ≤1%F.S. |
Load mode | < constant current mode > | < constant power mode > | < constant resistance mode > |
Heat dissipation system | Forced air cooling | Forced air cooling | Forced air cooling frequency control |
|
Protection function | < short circuit protection > | < overtemperature protection > | < fan fault protection > | < overvoltage protection > |
Panel interface | < auxiliary power interface > | < load bus interface > | < ground port > | < RS485 communication interface > |
Working power supply | AC220V 50Hz auxiliary power supply | AC220V 50Hz auxiliary power supply | AC380V 50Hz auxiliary power supply |
Device power consumption | 300VA | 300VA | 500VA |
Installation mode | Indoor, 19 inch rack type | Indoor, 19 inch rack type |
Indoor, vertical cabinet type
Bottom with universal casters
|
|
Overall dimension | 533-480-590mm Height * width * depth | 533-480-590mm Height * width * depth | 1300-700-900mm Height * width * depth |
Equipment weight | 32kg | 38kg | 80kg |
Appearance color | Ral7035 grey orange | Ral7035 grey orange | Ral7035 grey orange |
Communication station number | 8 | 9 | 10 |