MR-PV series for installation of the DC side to protect the terminal device in a PV system, like solar panels and inverters against the effects of lightning surge current..
Product Details
DC SURGE PROTECTIVE DEVICE
MR-1000PV
MR-PV series for installation of the DC side to protect the terminal device in a PV system, like solar panels and inverters against the effects of lightning surge current..It is installed in the main power system at DC circuit,to protect against the indirect lighting current,direct lighting current or other instantaneous over voltage. MR-PV series for installation of the DC side to protect the terminal device in a PV system, like solar panels and inverters against the effects of lightning surge current.
SPD is a port ,shocking protection, indoor –mounted installation, voltage-limited. SPD hold disconnector inside, then SPD breakdown failure by over heating,the disconnector can remove form the power grid automatically, and show indication signal, when SPD is working properly, visible window display green , lt display red when it breakdown and disconnect.
Nominal discharge current (8/20 μs){(DC+/DC-)>PE}(In)
20KA
Response time (A)
<25ns
Operating State/Fault indication
Green (good)/RED(repiace)
Conductor rating and cross-sectional Area
Minimum
60/75℃ 1.5mm2/14AWG solid/flexible
Maximum
60/75℃ 35mm2/2AWG stranded/25mm2/4AWG flexible
Mounting
35mm DIN rall per EN 60715
Enclosure material
UL 90VO thermopiastic
Degree of Protection
IP20
Capacity
3 Modules,DIN 43880
Standards information
IEC 61643-31 Type2,IEC 61643-1 ClassⅡ
product Warranty
Five Years
Remote Contact Signaling
Remote Contact signaling Type
Changeover contact
AC switching capacity(volts/Amps)
250V/0.1A
DC switching capacity(volts/Amps)
250V/0.1A;125V/0.2A;75V/0.5A
Conductor ratings and cross-sectional area for remote Contact signal terminals
60/75℃Max,1.5mm2/14AWG solid/flexible
Ordering
Order from Catalog numbers Above
TYPICAL APPLICATION SCHEMATICS
DIMENSION
WORKSHOP
EXHIBITION
WHY CHOOSE US
1.Diversified Products: we have PV Combiner box, DC MCB, DC SPD, PV isolator switch, MC4 connector.
2.Customer-oriented Service: Furthermore, we have a professional service team to meet customer’s special requirement. Our staff ensure that all your products ordered will be manufactured and tested according to the standards of sampling products, and all your orders will be smoothly completed with satisfied quality.
Our team’s strength and experience enables us to deliver high-quality diversified products with strict quality control, competitive prices and customer-oriented service.
MEANRAY have approved by: ISO/TS16949, ISO9001.
3.We are an professional manufacture of solar company, We have OA system, ERP system, PLM system…… , that can help us to management, control quality efficiently…