1. Parameters:
1. Applicable materials: PE film, PVC film, PET tape, aluminized film, composite materials, cable insulation paper, copper and aluminum foil, capacitor electrolytic paper, kraft paper, white paper.
2. Slitting width: 500-1200mm aluminized film
3. Effective width: 2400㎜
4. Mechanical speed: 350m / min
5, cutting speed 200m / min (depending on the cutting material)
6. Slitting and alignment accuracy: ≤ ± 0.10mm
7. Flatness of the end face of slitting paper: ≤ ± 0.20mm
8. Unwinding diameter: ≦ ø1000㎜
9. Unwinding and locking: no shaft loading ø3 ", ø6" optional
10. Unwinding tension: motor automatic taper tension control
11. Rewinding diameter: 4 * ø500㎜
12. Rewinding lock: ø3 "shaftless chuck (optional)
13. Rewinding tension: automatic taper tension control
14. Unwinding motor: 5.5KW * 2
15.Gearmotor: 0.55KW * 4
16.Power of whole machine: 23KW
17.Correction range: 100㎜
18.External dimensions: 3200 × 4200 × 1500㎜ (H)
19.Machine weight: about 6000㎏
20. Working power: 380V ± 10% 50HZ ± 5%, three-phase five-wire power supply.
Compressed air: clean,> 0.6MPA. Relative humidity of installation environment: 60% max.
Ambient temperature: 40ºC max.
Configuration:
1) Unwinding part: no shaft unwinding structure.
1.Effective unwinding width: 2400㎜
2. Unwinding diameter: ø1000㎜
3. Unwinding and locking: no shaft ø3 "or ø6"
4. Unwinding tension: It adopts motor braking and PLC joint control, with taper and dynamic automatic control.
5. Correction system: It adopts ultrasonic correction system, the sensor is used for edge line detection, and the electric actuator is driven.
6. Moving method: adopt linear bearing and platform moving type.
7. Mechanical structure: 65mm thick steel plate
2) Traction part: using pneumatic pressure roller traction system
1. Traction motor: 7.5KW motor
2. Transmission mode: synchronous belt drive
3. Main traction roller: ¢ 338mm traction wear-resistant butyl rubber roller, dynamic and static balance processing
4, encoder meter and speed
① Slit part: straight knife (floating knife)
3) Rewinding system: Independently driven biaxial structure, with double tension on the central surface.
1. Rewinding diameter: 4 × ø 500mm, end face uniformity ≤ ± 0.20mm
2. Rewinding shaft: four stations without shaft.
3. Rewinding transmission: using arc tooth synchronous belt drive
4, pressure structure: constant pressure mode, precision pressure regulating valve control.
4) Main control system: Main control unit composed of PLC and WEINVIEW man-machine interface
5) Low-voltage appliances: Chint Electric
6) Pneumatic component: Yadek
7) Rolling element: C3 level
8) Transition guide roller: ø120mm hard aluminum alloy aluminum roller (German cork stick wrapped non-slip), dynamic and static balance treatment, HV700 type
2, the main configuration list
product name | Specifications | Brand |
Computer slitting machine | DFQ-2400 | Licheng |
PLC Controller | MOTION Collection | Siemens |
touch screen | 10" | WEINVIEW |
Module | MOTION Collection | Siemens |
Geared motor | 4 sets | Domestic famous |
Main motor 7.5KW | 1 | ShangHaiRuiyu |
Unwinding motor 5.5KW | 2 | ShangHaiRuiyu |
Inverter | MOTION Collection | Hipmont |
Correction 8T | Ultrasonic detector | Precision control |
Pneumatic Components |
| TaiWanYadek |
Rolling element | C3 level (power level) | import |
Cutting method | Straight or round knife | Domestic famous |
Curved roller | Φ120 | Domestic famous |
Cork sticks for guide sticks |
| Germany |
Timing belt |
| Domestic famous |
Linear guide 25 |
| Taiwan |
Electronically controlled proportional valve |
| SMC |
Precision pressure regulator |
| import |
power switch button |
| Schneider |
Heavy discharge rack |
|
|
Loading device | Shaftless horizontal hoisting |
|