WAW-F series of computer-controlled electro-hydraulic servo universal testing machine (four-column double screw type)
The oil cylinder mounted under the host, Gap seals cylinder,four-column, two-screw frame structure (commonly known as six columns). As a result of four-column frame structure,compression test when sample sizes bigger, and excellent stability of the hoststructure. Space for tensile testson test, the test space can be used for compression, flexural and shear test(need to increase the corresponding aids). Lower beam movements using cycloid reducer, sprockets, chains, screwvice drive, to achieve tension, compression adjustment space. Main oil cylinder honing cylinders,hydraulic force sensors (precision load cell force measurement to be added, isa special configuration). Automatichydraulic clamping system to facilitate clamping the sample, good stability. Configure the relevant test to becompleted accompanied steel, metal samples, steel hinge line (the host computerchanges), cables, fasteners, concrete samples.
welcome to send the message to us,we will contact you in time!
Product type static hydraulic testing systems
Thestandard: GBT228 ISO: 15630-1,6892 ASTM: A370, C39, C469, E8 other: EN 10002-1
Ownedmaterial metal: asphalt / rock / concrete, fasteners, components
Industrymetallurgical industry, quality inspection centers, universities, industrialsupplies, automotive / rail / ship building, aviation industry
Testtype stretching: compression, bending, shear
The main technical parameters | WAW-F Series |
300 | 500 | 600 | 1000 | 2000 |
The biggest test of(KN) | 300 | 500 | 600 | 1000 | 2000 |
Force range | 4%~99%(Or 1% to 99% precision) |
Test Force showed the relative error | Better than ± 1% of indicated value (≤ ± 0.5% precision) |
Deformation Accuracy | ±1%(Or ± 0.5% precision) |
Stretching space(mm) | 550 | 550 | 550 | 650 | 800 |
Compression space(mm) | ≥500 | 650 |
Clamping methods | Automatic clamping |
Clamping diameter of round specimen(mm) | Φ10-Φ32 | Φ13-Φ40 | Φ13-Φ40 | Φ26-Φ60 | Φ40-Φ60 |
Flat plate specimen thickness(mm) | 0-15 | 0-15 | 0-30 | 0-40 | 0-40 |
Shear specimen diameter(mm) | 10(Optional, non-standard) |
Upper and lower platen size(mm) | Φ160(Alternative 204 × 204) |
The maximum distance between the fulcrum bending | Optional |
Pump motor power | 1.5KW |
Beam moves up and down motor power | 1KW |
Deformation measurement device | Photoelectric encoder or electronic extensometer |
Security devices | Software protection and mechanical limit protection |
■ four-column double screwstructure with the most reasonable working position and stress state.
■ customized according tothe requirements of the sample and configure related test space can beaccompanied by complete sample reinforced steel hinge wire, cable, fasteners,concrete tests
■ Hydraulic clamping devicecan independently adjust clamping speed (configurable inching clamping deviceaccording to customer requirements)
■ You can choose accordingto the requirements of a load sensor or oil pressure sensor, effectivelyimprove the test force measurement range and accuracy values.
■ fuel tank mounted underthe host structure reduces the height of the center of gravity lower test toreduce the impact of the breaking machine damage.
■ can accurately measure thedistance after moving beam with optical encoder.
■ integrated oil sourcedesign makes the machine more compact and reasonable, reduce floor space.
■ provides manual andautomatic dual control system, choose the operating mode.
■ built-in integratedtechnology-based controller card, reducing wiring, improve test real-timecontrol and real-time acquisition capabilities, improve product stability.