The panel furniture production line is composed of a combination of multiple equipment. The equipment generally consists of a cutting machine, an edge banding machine, infrared side holes, and furniture design and dismantling software. It can be said that it is our own economical panel furniture production line. The supporting equipment is in Time is convenient and can be operated, so do you know what the processing flow of your production line is?

The specific work flow is first flushing the back side-flushing the front side-cutting the material.

Take the text cutting machine of the automatic loading and unloading platform as an example:

One: There is an infrared automatic induction system on the automatic loading and unloading platform on the step, and the lifting of the automatic loading and unloading platform is controlled by the infrared automatic induction system. When the height of the plate on the platform does not reach the infrared sensing range, the automatic feeding platform starts to rise until it is sensed by the infrared.

Two: There is a suction cup on the scientific opener, and the suction cup on the beam of the self-made opener can be put on the platform. The material rollers on the machine work together to pile the scattered things into an overhead platform.

Three: The positioning spiral on the idling turntable of the advertising blanking machine automatically rises to determine the initial position of the feeder. The cans of the advertising opener and the feeding roller are at a right angle of nine degrees to each other, so that the positioning is more accurate.

TV 4: The performance is turned on and the performance is broadcast live.

Step 5: Make a vertical hole on the reverse side, then turn the board and repeat step 3.

Six: Make a vertical hole on the front, and then make a cutting machine to slit the plate according to the automatic slitting optimization software, that is, cutting.

Seven steps: After the cutting of the art cutting machine is completed, the air effect of the empty table is cancelled, and the push-pull device on the synthetic cutting machine is used to automatically push the plane board to the unloading platform.

During the process of opening and conveying, the open material machine has a secondary network.

The cutting stage is the main part of the entire panel furniture production line process. After the equipment is opened, it enters the edge banding process. Simple, fast, and easy to operate.

Regarding the processing flow of the economical panel furniture production line, the above content has been summarized in detail for everyone. There are seven steps in total. These seven steps have determined the effect of the processing and the smooth process. I hope to help you.