The woodworking CNC cutting machine has a large processing workload and high precision. When in use, the load capacity of the equipment usually exceeds the torque capacity of the servo motor itself. In order to improve the processing power of the cutting machine, we need to improve the servo by using a reducer. The output torque of the motor can solve this problem, so do you know the purpose of installing the reducer in the cutting machine? What is the function? Next, Zhongke CNC will introduce to you.

1. Forward torque:

The method to increase the output torque can be to directly increase the output torque of the servo motor, but this method not only requires the use of an expensive high-power servo motor, but also has a more robust structure. The increase in torque is proportional to the increase in control current. In this case, choosing a larger driver and improving the standards of power electronic components and related electromechanical equipment will greatly increase the cost of the control system.

2. Strengthen application: theoretically promote scientific and technological progress.

3. Forward performance:

As we all know, improper matching of load inertia of woodworking CNC cutting machine is one of the reasons for the unstable servo control. For large load inertia, the equivalent load inertia can be distributed through the reciprocal of the square of the reduction ratio to be controlled. Therefore, from this point of view, the reducer matches the control echo of the servo application.

4. Extend the service life of the equipment:

The reducer can also cope with the attenuation of the motor's low-speed control characteristics. Due to the controllability of the servo motor, there will be a certain degree of attenuation due to the decrease in speed, especially for the stability of signal acquisition and current control at low speeds. Therefore, the reducer can make the motor have a higher speed.

The function of the reducer of woodworking CNC cutting machine is mainly to increase the use intensity, control the forward performance, and extend the service life of the equipment. From this we understａnd that the installation of the reducer will greatly assist the function of the equipment, if necessary Friends of the equipment can contact us.