Welcome Customer !

Membership

Suzhou Ethonhuk Industrial Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

Suzhou Ethonhuk Industrial Equipment Co., Ltd.Free·1YRS

  • E-mail

    info@sinoflo.com.cn

  • Phone

    0086-512-69572579

  • Address

    No.789, Xiangcheng Ave, Xiangcheng Dist, Suzhou 215131, Jiangsu, China

Contact Now

Stainless Steel Sea Water Pump

Model
Nature of the Manufacturer
Other
Product Category
Sea Water Pump
Place of Origin
City, Province
Overview
Stainless Steel Sea Water Pump
Product Details
Stainless Steel Sea Water Pump


Product Overview

Sinoflo stainless steel seawater submersible pump is an ideal seawater lift pump to raise seawater and other corrosive medium. It can also be used as a fire pump to provide clean water, sea water or other similar fire extinguishing agents. The medium can contain a small amount of sediment, sea creatures and other substances. It has a series advantages such as compact structure, no need pump housing and easily automatic control. It is an ideal water lifting pump for municipal, mining, offshore platforms, shipyards and similar use conditions.

 

Working Condition

l  Medium: fresh water, sea water or similar corrosive liquid;

l  PH: 6.5~8.5;

l  Medium temperature: ≤35°C or 100°C

l  Sand content (weight ratio): ≤ 2%

l  Installation: vertical, horizontal and inclined. The water inlet should be immersed in the sea level (at low tide) below 1.5m, and motor base to sea bottom is usually not less than 2m. Under special conditions, the motor base can also be inserted into the sea bottom, but the height between pump inlet and sea bottom must be higher than 0.5m, and the immersing depth of the pump unit should not exceed 70m. The above special circumstances should be explained when ordering.

l  Motor chamber must be filled with clean water or filled with antifreeze as needed.

 

Technical Parameter

l  Power supply: 380V/460V/660V/1200V/3300V/6300V/10KV, 50Hz/60Hz, 3Ph;

l  Flow rate: 10m3/h~2400m3/h;

l  Head: 10m~300m;

l  Material: stainless steel 304/316/316L/duplex steel/tin bronze/zinc-free bronze/nickel aluminum bronze, etc.;

Note: When the actual working conditions do not meet the above conditions, please contact Sinoflo, so that we can take related measures during the design to ensure that the electric pump unit can meet the actual working conditions;

 

Structure Feature

l  Water pump

The sea water pump is a multi-stage centrifugal pump, which is composed of a pump shaft, impeller, guide casing, bearing bush, shaft sleeve and O ring etc. Depending on the operating conditions of the pump, the components material to be used are different. In seawater and corrosive media, the pump is usually made of copper-nickel alloy or stainless steel. In order to further improve the quality and service life of the pump, besides the selection of high-quality materials and precision manufacturing, the product structure and process treatment are also improved.

l  Electric Motor

The motor matched with the above pump is a special submersible motor designed for seawater, which is a water-filled fully sealed structure, and the stator winding is made of a polyethylene insulated nylon sheathed motor winding wire. According to the working conditions of the electric pump, the exposed parts of the motor are made of corresponding anticorrosive materials, and the motor dynamic seal adopts mechanical seal or oil seal. The motor adopts a self-lubricated sliding bearing with clean water or antifreeze lubrication. The motor lead-out cable is made of corrosion-resistant, waterproof sheathed flat cable or round cable.