Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>What is the soft start of three-phase asynchronous motor

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
What is the soft start of three-phase asynchronous motor
Date: 2022/11/3Read: 35

What is the soft start of three-phase asynchronous motor

Sep 16, 2022

What is the soft start of three-phase asynchronous motor

Three-phase asynchronous motors have been widely used in industry and life due to their simple and reliable performance. However, when starting directly, the starting current is too large, which can reach 4 to 7 times the rated current. The huge impact force is not a small test for the machine, and it has a great impact on the power grid. If it is started frequently, it will be more troublesome.

Although the frequency converter, especially the high-power frequency converter, has made great development and progress, its main function is prepared for the speed regulation of the motor. Therefore, it is not necessary to install the frequency converter for the speed regulation motor, especially A high-power inverter is a lot of money.

There is also star-delta starting, which reduces the starting current to a certain extent, but the torque is insufficient at the beginning, and the current is still not small at the moment of switching to delta operation.

There is also self-voltage step-down start, which has fewer start-up circuits, and it is difficult to control the circuit and the load torque, especially the huge transformer, which is expensive and obviously not a perfect circuit.

Therefore, a "soft start" circuit is specially designed for the starting of the motor. This product can solve the problem of motor starting and the price is much cheaper. This is due to the success of research on high-power thyristors. As shown in the figure, it is a kind of soft-start circuit principle.

When the soft starter starts, the voltage rises along the ramp, and the time to rise to full voltage can be set at 0.5~60s. The soft start also has a soft stop function, and the ramp time can be set at 0.6~240s.

At the same time, there are functions such as overload and overheat protectors inside the soft starter.