-
E-mail
amy@safeinvert.com
- Phone
-
Address
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
Membership
Help
Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS
amy@safeinvert.com
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
What is an explosion-proof inverter cabinet?
Explosion-proof frequency conversion cabinets are generally made of carbon steel or stainless steel. The installation method is vertical installation, not hanging installation. There are inverters placed in the cabinet of the inverter cabinet. Generally, manufacturers will consider the heat dissipation of their inverters during production. This is also an important factor regarding the life of the explosion-proof variable frequency power distribution cabinet. On the back of the inverter cabinet, where the inverter is installed, there will be a heat dissipation plate made of aluminum alloy. The inverter is installed on the top of the heat dissipation plate. When installing, the bottom of the inverter should be coated with oil and thermal paste to facilitate heat dissipation.
Explosion-proof inverter cabinet
As you can see on the outer surface of its frequency conversion cabinet, it is generally worn with a main switch of the power distribution cabinet. And the sub-switch that controls the main circuit of the frequency conversion, the frequency converter panel can be installed on the surface of the box to start the button. The governor on the inverter is generally stuffed inside the box, and the external manufacturer will install a separate potentiometer, which is controlled by connecting the AI1 +10V GND terminal of the potentiometer through the cable. After the inverter cabinet is completed, the manufacturer will Technicians will carry out debugging. Generally, inverter debugging is required. First, adjust the frequency conversion language to Chinese, and some brands do not need to adjust. Next, set the parameters of the downconverter, set it to terminal control, and set the frequency channel to AI1 channel. Conventional inverters only need to adjust these two parameters to run normally, ABB inverters do not need to be adjusted.
Let me tell you how to repair the explosion-proof inverter cabinet, when the inverter cabinet fails. Professional electricians should be overhauled, and operators should wear rubber shoes and rubber gloves. Wear professional electrician tools. In strict accordance with the requirements of explosion-proof standard maintenance. 1. Cut off the power first, unscrew the screw with a screw wrench, and open the door of the box. 2. If the internal damaged components are worse, the cables should be connected in order after replacement. 3. After the replacement, clean up the burnt slag ash copper wire to prevent short circuit when they touch together. 4. Check other parts of the cable to see if there is any looseness, and use a Phillips screwdriver to reinforce the cable. 5. Check whether the circuit breaker wires and cables are aging. 6. Check whether the yellow, green, red and blue of the load cable are wrongly connected and missed, and the connection is not tight.