Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>What is the cause of the low voltage of the inverter?

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
What is the cause of the low voltage of the inverter?
Date: 2022/11/3Read: 160

What is the cause of the low voltage of the inverter?

May 12, 2022

What is the cause of the low voltage of the inverter?

(1) The voltage on the input side of the power supply is low

Under normal circumstances, the power supply voltage is 380V, the allowable error is -15%~10%, and the intermediate DC voltage after three-phase bridge full-wave rectification is 513V. In some cases, the small fluctuation of the power line voltage will not cause inverter. The inverter will trip at low voltage, and the inverter will only run when the grid voltage value is between 80% and 85% of the rated value for more than one cycle. The low voltage on the input side of the power supply is mainly caused by the fluctuation of the grid voltage or the switching of the main power supply line, the impact of lightning strikes on the sine wave amplitude of the power supply, and the overload or unbalanced load of the power plant's own transformer.

(2) Low load side voltage

The main reasons are the startup and application of large equipment, line overload or large motor startup, etc. The inverter consists of a rectifier and an inverter.

Through the research on the inverter, the low voltage of the inverter refers to the low voltage of the intermediate DC circuit (that is, the input voltage of the inverter is too low). Generally, the inverter has protection functions such as overvoltage, loss of voltage, and instantaneous power failure. The inverter components of the inverter are divided into GTR and IGBT. When the inverter's inverter element is GTR, once the voltage is lost or the power is cut off, the circuit will stop outputting signals to the drive circuit, so that the drive circuit and GTR will all stop working, and the motor will be in a free braking state. When the inverter is IGBT, the inverter will be allowed to continue working for a short time td after voltage loss or power failure.

In the event of voltage loss or power-off time totd, the inverter self-protection will stop running. Generally td is 15 ~ 25 ms, and the power "sloshing" time to is usually more than a few seconds, the inverter will stop running through self-protection, so that the motor will stop running. Therefore, in order to solve the low-voltage tripping problem of the frequency converter, we cannot start with the inherent time td and the voltage loss time to of the frequency converter, but must start with the amplitude that can withstand the voltage drop.