-
E-mail
amy@safeinvert.com
- Phone
-
Address
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
Membership
Help
Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS
amy@safeinvert.com
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
First of all, why use a frequency converter, how to control the motor, and how to wire the two?
Inverter is a technology that should be mastered in electrical work. Using inverter to control motor is a common method in electrical control; some also require skilled use.
First of all, why use a frequency converter to control a motor?
Let's take a brief look at these two devices first.
The motor is an inductive load, it resists the change of the current, and will produce a large change of the current when it is started.
A frequency converter is a power control device that converts a power frequency power supply into another frequency by using the on-off function of a power semiconductor device. It is mainly composed of two parts of circuits, one is the main circuit (rectifier module, electrolytic capacitor and inverter module), and the other is the control circuit (switching power supply board, control circuit board).
In order to reduce the starting current of the motor, especially the motor with higher power, the greater the power, the greater the starting current, and the excessive starting current will bring a greater burden to the power supply and distribution network, and the frequency converter can solve this starting problem , let the motor start smoothly without causing excessive starting current.
Another function of using the frequency converter is to adjust the speed of the motor. In many occasions, it is necessary to control the speed of the motor to obtain better production efficiency, and the frequency converter speed regulation has always been its biggest highlight. The frequency converter changes the frequency of the power supply to achieve The purpose of controlling the motor speed.
The specific method is:
Control the stator flux linkage and introduce the stator flux linkage observer to realize the speed sensorless mode;
Automatic identification (ID) relies on accurate motor mathematical model to automatically identify motor parameters;
Calculate the actual value corresponding to stator impedance, mutual inductance, magnetic saturation factor, inertia, etc. Calculate the actual torque, stator flux linkage, and rotor speed for real-time control;
Realize Band-Band control According to the Band-Band control of flux linkage and torque, PWM signal is generated to control the switching state of the inverter.
Matrix AC-AC frequency conversion has fast torque response (
How does the frequency converter control the motor? How are the two wired?
The wiring of the inverter to control the motor is relatively simple, which is similar to the wiring of the contactor. Three main power supply wires enter and then go out to the motor, but the settings are mentioned, and the way to control the inverter is also different.
First of all, let's take a look at the terminals of the inverter. Although there are many brands and different wiring methods, the terminals of most inverters are also similar. It is generally divided into positive and negative switch input, which is used to control the forward and reverse rotation of the motor. The feedback terminal is used to feedback the running status of the motor, including running frequency, speed, fault status and so on. For speed given control, some inverters use potentiometers, and some use buttons directly, but they are all useless.
It is controlled by physical wiring. Another way is to go through the communication network. Many inverters now support communication control. Through this communication line, you can control the start and stop of the motor, forward and reverse, adjust the speed, etc., and feedback at the same time. Information is also transmitted through communications.